Available:*
Library | Item Barcode | Call Number | Material Type | Item Category 1 | Status |
---|---|---|---|---|---|
Searching... | 30000010344852 | TA404.2 I58 2013 pt.1 | Open Access Book | Proceedings, Conference, Workshop etc. | Searching... |
Searching... | 30000010344851 | TA404.2 I58 2013 pt.2 | Open Access Book | Proceedings, Conference, Workshop etc. | Searching... |
Searching... | 30000010344850 | TA404.2 I58 2013 pt.3 | Open Access Book | Proceedings, Conference, Workshop etc. | Searching... |
On Order
Summary
Summary
Selected, peer reviewed papers from the 2012 International Conference on Advances in Materials and Manufacturing Processes (ICAMMP 2012), December 22-23, 2012, Beihai, China. The 508 papers are grouped as follows: Chapter 1: Composites; Chapter 2: Micro/Nano Materials and Ceramic;Chapter 3: Polymers and Biomaterials; Chapter 4: Optical/Electronic/Magnetic Materials;Chapter 5: Chemical Materials and Technologies;Chapter 6: Energy Materials; Chapter 7: Iron and Steel; Chapter 8: Metal Alloy Materials; Chapter 9: Materials for Building and Structures;Chapter 10: Mechanics of Materials; Chapter 11: Environmental. Research, Friendly Materials and Recycling Waste Technologies;Chapter 12: Surface Engineering/Coatings;Chapter 13: Materials Forming; Chapter 14: Materials Machining; Chapter 15: Welding & Joining; Chapter 16: Laser Processing; Chapter 17: Casting and Solidification; Chapter 18: Geology and Mineral Processing.
Table of Contents
Effects of Void on Physical Properties of Hygrothermal Conditioned CFRP | p. 3 |
Flammability and Mechanical Properties of Intumescent Flame Retarded PP/EVA Composites | p. 7 |
Preparation and Characterization of Graphene/RTV Silicone Rubber Composites | p. 11 |
Role of Multiwalled Carbon Nanotube on Mechanical Reinforcement of High-Density Polyethylene | p. 15 |
The Mechanical Property of CFRP Laminates with Voids | p. 25 |
The Static Mechanical Properties of Carbon/Epoxy Composite Laminates with Voids | p. 29 |
Compressive Behavior of Spark Plasma Sintered CNT Reinforced Al2124 and Al6061 Nanocomposites | p. 33 |
Bentonite Composite and Fibre | p. 38 |
Exploration of Al Matrix Composites Reinforced with Al-Ti Intermetallics/Ti Metal Compound Spherical Agents | p. 43 |
Linear Defect States of Phononic Crystal Thin Plates - An Application of Finite Element Method | p. 48 |
Effects of Delaminations on Vibration Characteristic for HT3/5224 Carbon Fiber Reinforced Laminated Plate | p. 52 |
Electrical Property of Carbon Nanotubes/Epoxy Resin/Polyetherimide Composites with Inverted-Phase Structure | p. 56 |
Fabrication and Microstructures of WC-Based Composites by Plasma Jet Metallurgy | p. 60 |
Microstructure and Wear Properties of In Situ Production of (Fe,Cr)7C3 Particulate Bundles Reinforced Iron Matrix Composites | p. 64 |
Preparation of High-Filled Talcum Masterbatch and its Application in Polypropylene | p. 69 |
Selective Distribution of Carbon Black in Epoxy Resin/Thermoplastic Multiphase Composites | p. 73 |
Thermal Analysis for Fiber-Reinforced Composites Containing Inhomogeneous Interphase Subjected to a Radial Constraint | p. 77 |
Synthesis and Properties of Flame-Retardant Waterborne Emulsion Derived from O-Cresol Formaldehyde Epoxy Resin | p. 84 |
A Comparative Investigation on Foamability and Structure of Al Foams Added with Precipitator and Cenosphere Fly Ash Particles | p. 89 |
Mechanical Properties and Morphology of Long Glass Fiber Reinforced PP Composites | p. 93 |
Hydriding Characterization of La2Mg17-Ni Composite Materials by Mechano-Synthesis | p. 98 |
Preparation of TiC Hard Metal by Presssureless Infiltration Method | p. 102 |
Character Alteration Research on Fe3O4 /PVA Susceptible Composite Film | p. 106 |
Effects of PP-G-MA and Epoxy Resin on Morphology and Mechanical Properties of the PP/LGF Composites | p. 110 |
Study on Properties of Epoxy Resin /Al2O3 Composites | p. 116 |
Studies on Curing Kinetics of Epoxy Resin / Modified Amine System | p. 121 |
Epoxy Resin (EP) / Nano-SiO2 Composite Material Preparation by Two Processes | p. 127 |
Preparation of Stearic/Montmorillonite Composite as Form-Stable Phase Change Material | p. 131 |
Simulations and Experimental Validation of Compression Properties of SiC/Fe-20Cr Co-Continuous Composites | p. 135 |
Numerical Simulations of Uniaxial Compression Properties of SiC/6061 Aluminum Alloy Co-Continuous Composites | p. 139 |
The Isothermal Simulation of the Un-Saturated Flow in the Dual-Scale Porous Media | p. 143 |
Diameter-Controlled Synthesis of Single-Walled Carbon Nanotubes | p. 151 |
Direct Electrodeposition of Highly Ordered Au-Cu Alloy Nanowire Arrays | p. 155 |
Effect of High Shear Mixing Parameters and Degassing Temperature on the Morphology of Epoxy-Clay Nanocomposites | p. 159 |
Effects of Processing Techniques on Morphology and Mechanical Properties of Epoxy-Clay Nanocomposites | p. 167 |
Evaluation of Residual Iron in Carbon Nanotubes Purified by Air and Acid Treatments | p. 175 |
Experimental Studies on Micro-Characteristics of Nanocrystalline MgO | p. 178 |
Formation Mechanism of Polyaniline Nanostructures in PEG Solution | p. 182 |
A Modified Monte Carlo Method for Phonon Radiative Transfer in Nanoscale Materials | p. 188 |
Microstructure and Optical Properties of ZnS:Mn Nanocrystals | p. 192 |
Scallion-Root-Shaped GaN Nanorods Grown by Two-Step Method and Study on their Properties | p. 197 |
Synthesis and Characterization of Carbon-Encapsulated Nickel Nanoparticles from De-Oiled Asphalt | p. 202 |
A Mild and Efficient Approach for the Reduction of Graphene Oxide | p. 206 |
Compression Behavior and Mechanical Modeling of Nanocrystalline Ni under High Strain Rate Loading | p. 210 |
Hollow Structure of CdSe by W/O Microemulsion Method | p. 215 |
Preparation and Characterization of Micron Silicon Dioxide Spherical Particles | p. 219 |
Preparation of Nitrogen Hybrid Ordered Mesoporous Carbons from Melamine-Phenol-Formaldehyde Resoles by Soft-Template Method | p. 223 |
Study on a Preparation of PS Hollow Submicro-Fiber by Coaxial Electrospinning | p. 228 |
Comparison between Dextran-Coated Superparamagnetic Iron Oxide Nanoparticles and Magnetoliposome on Rabbit Corneal Endothelial Cells Labeling | p. 234 |
Preparation and Characterization of MnO2 Loaded CuO Nanosheets | p. 241 |
Preparation of Fe (III) - Amidoximated PAN Nanofibers Complexes for Degradation of Azo Dye under Visible Light Irradiation | p. 245 |
Synthesis of Chitosan-Stabilized Gold Nanorod Using Tripolyphosphate | p. 250 |
Preparation of Nanoparticles of Calcium Oxalate Dihydrate | p. 254 |
Preparation of Dandelion-Like Nano/Micro Zinc Oxide Material | p. 258 |
The Research on the Photocatalytic Performance of one Kind of Nano Zinc Oxide | p. 262 |
Molecular-Dynamics Simulation of Structure Change for a Molten Cu297 Nanocluster during Rapidly Quenching | p. 267 |
Synthesis of ZnO Nanowires for Hydrogen Sensor Application Using Simple Heating Technique | p. 272 |
Preparation and Characterization of Shellac/Polyvinylpyrrolidone Nanofiber as a Material for Medical Application | p. 278 |
Stable Dispersed Graphenes Prepared by the Reduction of Graphene Oxides with Mercapto Acid | p. 282 |
A Study on Crystallization of Fused Silica/Zirconia Ceramic Composites | p. 286 |
Lamination of Green Ceramic Tapes in the Manufacturing of Multilayer Ceramic Devices | p. 290 |
Performance Study of Composite Clay Instead of a Single Plastic Clay | p. 294 |
Predicting the Mechanical Properties of Electric Porcelain Using ANN and MLR | p. 298 |
Effects of the Content of ZrO2 Nanoparticles on the Microstructure and Properties of Al2O3-TiC-ZrO2 Micro-Nano-Composites | p. 304 |
Research on Mullite-Corundum-Aluminium Titanate Composite | p. 308 |
Research on Polymerization of PMN-PZT Piezoelectric Ceramic by Gelcasting Using NMAM System | p. 312 |
Sol-Gel Preparation and Infrared Radiation Property of Zinc-Substituted Cordierite Ceramics | p. 316 |
Size Influence on Magnetic Properties of Nickel Hollow Spheres | p. 321 |
Preparation and Microwave Absorbing Performance of Co-Cu-Ni Ferrite/Multi-Walled Carbon Nanotubes Composites | p. 327 |
Characterization and Properties of UV-Cured Epoxy Acrylate/POSS Nanocomposites | p. 331 |
Facile Preparation of Polylactic Acid/Ketoconazole Composite Microspheres by Oil/Water Solvent Evaporation Method | p. 335 |
Electrical Properties of Pt Nanowires Deposited with Focused Ion Beam | p. 339 |
Structural Stability and Electronic Properties of Fe-Doped B13C2: First-Principles Investigation | p. 344 |
The Preparation and Study of Graphene Supported CoxMn3-XO4 Nanocomposites as Advanced Oxygen Reduction Reaction Electrocatalyst | p. 348 |
Shape-Controlled Synthesis and Pattern Recognition of Dendritic Co3O4 Superstructures | p. 352 |
Oxidation Resistant of Silicon-Boron Pitch Carbonization Product | p. 356 |
Study on the Influence of Porous Anodic Alumina Membrane on Separation of Hydrogen and Methane | p. 362 |
Effects of Solid Content on Properties and Structure of PMN-PZT Green Body by Gelcasting | p. 367 |
Characteristics of Alumina Films Formed by the Annealed Aluminum Films at High Temperatures in Air | p. 371 |
Rheological Properties and Crystallization Behavior of Poly(trimethylene Terephthalate) Blends with PBPCS | p. 377 |
Preparation and Properties of Copolyimides Containing Fluorine and Alicyclic Group | p. 381 |
Preparation of PMAM-B-PNVP and its Hydrolysate by RAFT Polymerization: Structure Characterization and its CO2 Permeation Performance | p. 386 |
Synthesis of Cellulose-Graft-Poly (L-Lactide) via Ring-Opening Polymerization and Degradability Research | p. 398 |
Screening and Identification of #946;-Glucosidase Producing Strain of Fusarium Oxysporum | p. 402 |
Study on Formula of New Type Flame Retardant Polyethylene | p. 406 |
Study on the Preparation and Properties of the Phosphorus-Containing Flame Retardant PET Copolymer | p. 410 |
Branched and Responsive Antimicrobial Polymers Based on Modified PVA for Functionalizing of Cellulose Fibres | p. 414 |
Graft Copolymeriztion of Glycidyl Methacrylate/Styrene onto Polypropylene in Solid State | p. 418 |
Maleic Anhydride Grafted Polymers Toughening and Flame Retardant Polystyrene Study on Modification | p. 423 |
R-ATRP of Acrylamide under the Action of Copper Complex System in Aqueous Two-Phase | p. 430 |
Study on Hydrolysis Conditions of Flavourzyme in Soybean Polypeptide Alcalase Hydrolysate | p. 435 |
Study on Soybean Polypeptide Refining Process | p. 439 |
Comparison of Different Extraction Methods for Antioxidant Property of Flavonoids from Pomelo Peel | p. 443 |
A Novel Effective Y-Shaped Silicon Stent for Treating Canalicular Laceration | p. 449 |
Extraction of the Pectin from Virginica Stem Bark and Study on its Structure and Composition | p. 454 |
Synthesis and Properties of Biodegradable Liquid Crystalline Poly(ester-Urethane)s Based on Poly(L-Lactic Acid) | p. 459 |
Preparation, Characterization of Substituted Aromatic Heterocyclic Phosphate Salts and the Application in Isotactic Polypropylene | p. 463 |
Preparation and Research of the Multifunctional Heat Stabilizer with Rare Earth Used in PVC Products | p. 470 |
The Microstructure of Polyurethane (PU)/Ethylene-Vinyl Acetate (EVA) Polymer Lastomer of Analysis | p. 475 |
Zinc Hydroxystannate-Coated Mineral Grade Mg(OH)2 as Flame-Retardant and Smoke Suppression for Flexible PVC | p. 481 |
Flame Retardant Low Density Polyethylene with Aluminium Hydroxide/ Commercial Fire Retardants FR01 Synergistic System | p. 485 |
Construction of Dendritic-Linear Brushes on Silica Nanoparticles by Electrostatic Assembly | p. 490 |
Study on the Optimization of Copolymerization Conditions of LASP/AA/AM Polymer | p. 495 |
Nonisothermal Crystallization Kinetics of Isotactic Polypropylene Filled with a Novel Nucleating Agent | p. 501 |
Assessment of Functionality of Aged Cables at Loading by Heat Flux | p. 508 |
Experimental Research on Co-Gasification of Crude Glycerin and Corn Cob | p. 512 |
Microstructural, Optical and Electrical Properties of ZnO:Sn Thin Films Deposited by Sol-Gel Method | p. 519 |
Optical Constants of Quartz Glass in 1.34-4.20#956;m Spectral Range | p. 523 |
Optical Studies of Poly (N-Carbazole) (PVK) Blending with Polyvinylpyrrolidone (PVP) Using Tauc/Davis-Mott Model | p. 527 |
Refractive Index Dispersion and Optical Dielectric Properties of Poly(N-Carbazole)/Poly(vinylpyrrolidone) Blends | p. 532 |
The Potential Realization of Solar-Blind Ultraviolet Detecting Using ZnO-Based Alloy Thin Film | p. 537 |
Two-Photon Absorption Properties of s-Triazine Derivatives With Near Octupolar Symmetry | p. 542 |
Combustion Synthesis of CaMoO4:Eu3+, Li+ Red Phosphors Using Urea-Thiourea Mixture Fuels | p. 546 |
Excitation and Emission Properties of Poly(N-Carbazole)/Poly(vinylpyrrolidone) Blends Characterized by Fluorescence Spectroscopy | p. 550 |
First-Principle Calculation on Misfit Layered Cobaltite and La-Doped Series | p. 554 |
Fluorescence and Energy Transfer in Er3+/ Nd3+ Co-Doped Oxy#64258;uoride Tellurite Glass | p. 559 |
Hollow Spherical CaMoO4:Eu3+, Li+ Phosphors Prepared by Spray Pyrolysis | p. 563 |
Influence of Coating Content on the Magnetic Properties of Iron-MnZn Ferrite Soft Magnetic Composites | p. 567 |
Preparation and Characterization of SrAl2O4:Eu2+ by Microwave - Combustion Method | p. 572 |
Study of Structural and Electrical Transport Properties of Polycrystalline La1-XCaXMnO3 (x=0.33, 0.5 and 0.9) Prepared by a Co-Precipitation Method | p. 576 |
Synthesis of High Brightness Red Long Persistent Phosphor (Sr 1-X Ca X)S: Eu, Dy by Sol-Gel Thermolysis Method | p. 581 |
An Oxide-Diluted Magnetic Semiconductor: Co-Doped ZnO | p. 585 |
First-Principles Calculation of Electronic Structure of the Cu-Doped Pyrite FeS2 | p. 590 |
Growth of ZnO Films on Si(111) by Metalorganic Chemical Vapor Deposition with AlN and Low-Temperature ZnO Double Buffers | p. 594 |
Hydrothermal Synthesis and Photoluminescence Properties of Ca(MoO4)x(WO4)(1-X) Microcrystallines | p. 599 |
Measurement Error of the Coercivity Hcj of NdFeB Permanent Magnet Caused by Air Gap | p. 607 |
Numerical Simulation of the High Gain and Low Breakdown Voltage InGaAs/InP Avalanche Photodiode | p. 612 |
Optical Properties and Defect Study of Ca2+ Co-Doping Lu2Si2O7:Ce3+ Single Crystal Scintillator | p. 616 |
Preparation and Research on Luminescent Properties of Eu-Doped TiO2-ZnO Composite Powders | p. 622 |
Preparation of CsI(Tl) Scintillation Film by RF Magnetron Sputter Method and its Structural and Optical Characterization | p. 628 |
Study on Y3Al5O12:Eu3+ Phosphor Coated by Bi2O3 | p. 634 |
Exposure Schedule for Uniform Diffraction Efficiency of Partially-Overlapping Multiple Holograms in Dual Monomers Photopolymers | p. 638 |
Fabrication of Silicon Nanowires by Electroless Etching for Thermoelectric Application | p. 642 |
The Growth and Optical Properties of CdS Nanorods via Solvent-Thermal Route | p. 647 |
Characteristics of Silicon Nanowire Field Electron Emission | p. 654 |
The Study of Au/TiO2/Au Resistive Switching Memory with Crosspoint Structure | p. 659 |
Novel Preparation Method and Luminescent Properties of Eu3+ Doped CdWO4 Nanorod | p. 664 |
Combustion Synthesis of Nanocrystalline Y2O2S: Eu 3+ , Mg 2+ , Ti 4+ Red Long-Lasting Phosphors Using Mixture Fuel of Thiourea and Citric Acid | p. 669 |
Study on Bilayer-Type ZTO Thin Films Prepared by MOCVD | p. 673 |
A Novel Demultiplexing Photodetector with Integrated Vertical Conical Structure | p. 677 |
Preparation and Properties of ZnO@ZnS Nano-Array Core-Shell Structure with Different Concentration of TAA | p. 683 |
Synthesis of Diaryl Pyrrolones Derivatives as Combretastatin A-4 | p. 689 |
Mechanochemical Assisted Synthesis of Titanium Silicalite-1 | p. 693 |
Preparation of Controlled Release Urea and its Release Characteristics | p. 698 |
The Effect of Density on Polyesterification Kinetics of Neopentyi Glycol/Maleic Anhydride System | p. 703 |
An Investigation on Properties of Sn-SBA-16 Synthesized without Mineral Acid Added | p. 707 |
Catalytic Dehydrogenation Reaction Activity of Cyclohexanol over Cu2O/Mg(OH)2 Catalysts | p. 711 |
Development Toxicity and Degradation of Diethyl Phthalate | p. 717 |
Phosphotungstic Acid, Silicotungstic Acid and Silicon Tungsten-Cobalt Heteropoly Acid with Bovine Serum Albumin Interaction | p. 722 |
Study on Compound Corrosion Inhibitor of Aluminum in Salt System | p. 726 |
The Parameters of Preparing Polyaniline Doped by Hydrochloric Acid | p. 730 |
A Novel Formula of Diverting Acid System and Application | p. 734 |
Preparation of Hollow Microsphere and its Application in Paper Coating | p. 740 |
Preparation of Low-Sulfur Expanded Graphite with Different Size Particles | p. 745 |
Comparative Study on Compositions of Oil-Water Transition Layer before and after ClO2-Treatment Process | p. 749 |
Optimal Design for ASP of Mixed Surfactants with Rhamnoilpid | p. 753 |
Thermal Degradation Study of Lithium and Potassium Iodide/Epoxidized Natural Rubber Polymer Electrolytes | p. 757 |
Synthesis and Evaluation of a New Type of Cationic Gemini Surfactant | p. 765 |
Characterization and Synthesis of a Betaxolol Hydrochloride Intermediate | p. 770 |
Cu(OH)2/N-TiO2 Compound Heterojunction Photcocatalyst: Preparation, Characterization and Photocatalytic Properties | p. 774 |
Preparation of Three-Dimensionally Interconnected Meso/Mesoporous Ho3+ Doped TiO2 Nanoparticles with Enhanced Photocatalytic Activity | p. 779 |
Research on the Influence of PEG to the Nuclei Population Density of Copper Electrocrystallization | p. 787 |
Preparation of La2(WO4)3 by Two Step Method and Characterization | p. 791 |
The Synthesis and Characterization of Zinc Borate Zn2B6O11·7H2O | p. 795 |
Synthesis and Characterization of Bridged Amine-Functionalized Mesoporous Organosilica Materials | p. 799 |
A Density Functional Study of PdCn(n= 2-12) Clusters | p. 815 |
Optimization of Membrane Electrode Assemblies Anode of a Micro Direct Methanol Fuel Cell by Mathematical Modeling | p. 819 |
LiMn2O4 Prepared by Liquid Phase Flameless Combustion with F-Doped for Lithium-Ion Battery Cathode Materials | p. 825 |
Combustion Kinetics Characteristics of Dry Distillation Coal Tar | p. 831 |
Experimental Research on Producing Shale Oil through Thermal Cracking of Small-Particle Oil Shale | p. 839 |
Structures of Li1+xMn2-XO4 Synthesized by Different Methods | p. 844 |
Effect of Cr Doping on Electrochemical Performance of LiMn2O4 | p. 848 |
Electrochemical Behaviors of Different Gradesof Pure Aluminum in Alkaline Solution | p. 853 |
Effects of Polyethylene Glycol on Agarose-Based Magnetic Polymer Electrolyte for Dye-Sensitized Solar Cell | p. 860 |
Structure and Electrochemical Performances of LiFePO4/C Composite Cathode Coating with Different Carbon Sources for Lithium Ion Batteries | p. 865 |
Study on Low-Temperature Oxidation Process of Low Rank Coal by In Situ FTIR | p. 871 |
Synthesis and Performances of a Fe-Site Doped Lithium Iron Phosphate | p. 877 |
Synthesis of (Ba,Ti)-Doped Apatite-Type Lanthanum Silicate Nano-Sized Powders via Microwave-Assisted Sol-Gel Auto-Combustion Route | p. 882 |
Sheet-Shape Specimen Creep Behavior and Microstructure Analysis of Ni-Based Alloy C276 at High Temperature | p. 886 |
Synthesis, Characterization and Electrochemical Properties of Li1+xMn2O4 Spinels Prepared by Solution Combustion Synthesis | p. 891 |
Research Progresses of Two Kinds of Novel Electrolyte Lithium Salts: Lithium Bis(oxalato) Borate and Lithium Oxalyldifluroborate | p. 896 |
Surface Passivation of Silicon Wafers by Iodine-Ethanol (I-E) for Minority Carrier Lifetime Measurements | p. 901 |
Alloy Design and Microstructure Control for the Production of Heavy Ductile Irons Used in Large-Scale Windmills | p. 909 |
Corrosion Behavior of Low-Alloy Steel in COT Upper Deck O2-CO2-SO2-H2S Moisture Environment | p. 916 |
Effect of Different Strain on Microstructure Evolution of Medium Carbon Steel | p. 923 |
Effect of Phosphorus Contents on Texture and Grain Boundary Character for the Annealing High Strength Ti-IF Steels | p. 929 |
Influence of Rare Earth on Microstructure of 20MnCrNi2Mo Wear-Resistant Cast Steel | p. 934 |
Oxidation Behavior of a TP304H Stainless Steel in the High Temperature and High Pressure Water Vapor | p. 938 |
Study on Metal Thermal Reduction of Caustic Calcined Dolomite Based Compound Desulfurizer | p. 942 |
Continuous Cooling Transformation of Overcooling Austenite and Structure Evolution of Si Steel | p. 947 |
The Evolution of M/A in Ultra-Low Carbon Bainite Steel | p. 952 |
Sulfides Precipitation during Transformation of a High Sulfur Alloy Steel | p. 958 |
Application of Frumkin Isotherm for Carbon Steel Corrosion in Soil Media | p. 963 |
Transformation Behavior of Austenite Continuous Cooling of Nb-Ti Micro-Alloyed Low Carbon Steel | p. 967 |
Effect of Ultrasonic Inoculation Treatment on Distribution of Sulphur in Fe-S Alloy | p. 971 |
The Microstructure and Elements Distribution of High-Chiromium Hypereatectoid Steel by High-Temperature Homogenization | p. 975 |
Study of V2O5 Direct Alloying Reductants | p. 981 |
Process Design Strategies for Producing Heavy Section Steel with Improved Quality | p. 988 |
Development of Domestic Prehardened Plastic Mould Steel | p. 992 |
Study on Antibacterial Properties of SUSXM7 Cu- Bearing Austenitic Stainless Steel | p. 997 |
The Evolution of Deuterium Bubbles in Iron under Electron Irradiation | p. 1002 |
Effect of Temperature on Structure of Outer Fe Oxide Layer of Fe-2.2Si Alloy | p. 1009 |
Effects of Alloy Composition and Annealing Treatment on the Performance of Aluminum Conductor | p. 1016 |
Effects of Ce, Mn, Cr on the Microstructure and Properties of High-Iron Eutectic Al-Si Piston Alloy | p. 1023 |
Effects of Si, Cu and Mg on the High-Temperature Mechanical Properties of Al-Si-Cu-Mg Alloy | p. 1030 |
Effects of the Aging Time and Temperature on the Microstructures and Mechanical Properties of 6082 Aluminum Alloy Extrusions | p. 1035 |
Influence and Theory Analysis of Ti, Zr, B on the Refining Effect of Aluminum Alloy | p. 1043 |
Effect of Heat Treatment on Microstructure and Mechanical Properties of A390 Alloy | p. 1049 |
Effects of High Co Contents in Fe-Cr-Mo-C-B-Y Alloy on the Glass Forming and the Mechanical Properties | p. 1054 |
Influence of Gd Content on the Microstructure and Mechanical Properties of Zn-Al-Mg-Si Alloy | p. 1059 |
Tensile Properties of a Cast TiAl Alloy with Directional Lamellar Microstructures | p. 1063 |
The Divacancy Formation Energy for B2 FeAl Alloy Simulated with Finnis-Sinclair many-Body Interatomic Potential | p. 1067 |
An Investigation on Grain Refinement Mechanism of Master Alloys Al-Ti, Al-TiC and Al-Ti-C Toward Pure Aluminum | p. 1072 |
Effect of Heat Treatment on Microstructure and Properties of Ti-6.5Al-1.5Mo-2.5V-2Zr Titanium Alloy | p. 1076 |
Effect of Si Content on Deformation Behavior of DC Cast Al-Si Alloys | p. 1080 |
Microstructure and Mechanical Property of the Directionally Solidified NiAl-Cr(Mo)-Hf/Ho Alloy | p. 1084 |
Research on Corrosion Rate Prediction of Aluminum Alloys in Typical Domestic Areas Based on BP Artificial Neural Network | p. 1088 |
The Precipitation Behavior of #947;' Phase in Superalloy FGH96 during Continuous Solution Cooling Conditions | p. 1092 |
In Situ Study of Stress-Induced Martensitic Transformation in Ni47Ti44Nb9 Shape-Memory Alloys | p. 1096 |
Investigation of Porous NiAl Intermetallics Prepared by Self-Propagating High-Temperature Synthesis | p. 1102 |
Microstructure and Growth Behavior of the Intermetallic Compound for Sn-1.0Ag-0.5Cu-NiB/Cu Solder Joint Interface | p. 1106 |
Eutectoid Transformation in Zn Alloy with High Al Content | p. 1111 |
High Temperature Oxidation Behaviour of AlCuTiFeNiCr High-Entropy Alloy | p. 1115 |
Microstructure Evolution of Al-Ti-C Alloy Wires during Remelting Process | p. 1119 |
The Effect of Aging on the Corrosion Property of Al-7Si-0.3Mg | p. 1124 |
Precipitation Kinetics and Behavior of #948; Phase in Inconel 718 Alloy | p. 1128 |
Research on Multiple Plastic Deformations of Ultra-High Strength Aluminium Alloy | p. 1132 |
Prediction of Electrical Conductivity of Cu-15Ni-8Sn-XSi Alloys Using the Physical Model and Artificial Intelligence Model | p. 1138 |
Preparation and Corrosion Resistance of Cu-Based Bulk Glassy Alloys | p. 1143 |
The Inhibiting Effect of Monoethanolamine on 6063 Aluminum Alloy in Sodium Chloride Solution | p. 1149 |
Efficiency in the Extraction of Pure Silicon from Al-Si Alloy Melts by a Combined Process of Solvent Refining and Centrifugation for Solar Silicon Feedstock | p. 1153 |
Research on Material Erosion Mechanisms of High Si-Al Alloy by Micro-EDM | p. 1157 |
Manufacture, Structure and Properties of Copper Foams | p. 1163 |
Experimental Measurements of the Selected Properties of AeroTherm | p. 1169 |
Influence Research on the Pretreatment of Recycled Coarse Aggregate to the Strength of Recycled Concrete | p. 1173 |
Research on Reinforced Concrete Column under High Speed Impact of Different Diameter Projectile | p. 1177 |
The Influence of Combined Admixture of Super-Fine Limestone Powder and Low-Quality Fly Ash on the Performance of Cement Mortar | p. 1181 |
The Temperature Distribution Research of Foaming Gypsum Mold in the Fabrication and Pouring Process | p. 1185 |
Utilizing the Waste Polystyrene to Enhance the Thermal Insulation of the Local Buildings | p. 1191 |
Analytical Model of Capillary Suction Velocity of a Pipe with Multiple Sizes | p. 1201 |
Research on Porous Properties of Air-Entrained Lightweight Aggregate Concrete | p. 1209 |
Study on BFRP Constrained Preloaded Concrete Square-Shaped Column | p. 1213 |
Study on Indoor Detecting Methods and Performance of Shotcrete | p. 1217 |
Design a Thermosetting Asphalt Mixture for Surfacing on Orthotropic Steel Deck Bridge | p. 1221 |
Influence of Aspect Ratio of Macro Synthetic Fiber on Mechanical Properties of Shotcrete | p. 1226 |
Research on Preparation Technology of Exposed-Aggregate Cement Concrete Pavement | p. 1233 |
Synergistic Effects and Cracking Bending Strength for Steel-Polypropylene Hybrid Fiber Reinforced Concrete | p. 1237 |
Use of Sugarcane Bagasse Ash as Raw Material in Production of Autoclaved Lightweight Concrete | p. 1242 |
The Influences on Cement Clinker by Disposing Glyphosate Waste Mother-Liquor with Rotary Kiln | p. 1247 |
Research Status on Fatigue Behavior of Reinforced Concrete Beams Strengthened with Fiber Reinforced Polymers | p. 1252 |
Tricalcium Silicate (C3S) Properties in Different Physical and Chemical Environment | p. 1256 |
Vibrating Mixing and the Improvement of Concrete Performance | p. 1260 |
Asphalt Material Aging Mechanism and Characteristics Analysis Based on Infrared Spectrum | p. 1265 |
The Experiment Research of a New Cementing Material Applied in Iron Tailing Filling | p. 1269 |
Artificial and Natural Weathering of Chlorinated Polyvinyl Chloride (CPVC) | p. 1277 |
Effect of Moisture Content on Thermal Physical Properties and Heat Transfer of Plywood during Hot-Pressing | p. 1283 |
Failure Analysis of A7N01S-T5 Aluminum Alloy Buffer Beam for High-Speed Train | p. 1290 |
Review on Surface Failure Mode of Metallic Materials in Very High Cycle Fatigue Regime | p. 1295 |
The Effect of UIT on the Residual Stress of 7N01 Al-Alloy Welding Joints | p. 1301 |
Analysis of Indentation Size Effect of Vickers Hardness Tests of Steels | p. 1307 |
Experiment Study and Numerical Simulation of CFRP Sandwich Structure on Aircraft Ditching Model | p. 1311 |
Study on Cracking of Anchor Structure due to Reinforcement Corrosion | p. 1315 |
Study on the Electrometric Method to Measure the Young's Modulus of Metal Materials | p. 1319 |
Concrete Thermal Stress of Arch Dam in Construction Period of Stability against Sliding of Steep Slope Section | p. 1335 |
Failure Analysis on Natural Gas Transmitting Pipe Based on the Data of Intelligent Inspection | p. 1340 |
Integrity Assessment on Natural Gas Transmitting Pipe Based on the Finite Element Analysis | p. 1345 |
Testing and Evaluation of Comfort Performances of Mongolian Clothing Fabrics | p. 1349 |
Ultrasonic Nondestructive Evaluation of Composite Components Using Advanced Total Focusing Method | p. 1353 |
Damage Calculation and Fatigue Life Prediction for Freight Car Body | p. 1357 |
Reliability Analysis of Wear Casing Internal Pressure Strength | p. 1362 |
Research on Structural Fatigue Damage Based on the Superimposed Load Spectrum Method | p. 1367 |
Stress Analysis of Perforated Plate Based on ANSYS | p. 1372 |
Influence of Point Defects on Band Gaps of Fe-Epoxy in Two-Dimensional Phononic Crystal | p. 1377 |
Transmission Properties in 2D Phononic Crystal Thin Plate with Linear Defect | p. 1383 |
Research on CSP Work Roll Defect Causes and Improvement Measure | p. 1388 |
A Fretting Damage Analysis of Railway Axle | p. 1393 |
Dry Sliding Friction and Wear Behavior of Surface Hardened Ferrous PM Cam Materials for Automobile Applications | p. 1399 |
Failure Analysis on Strain Clamp on 220kV Transmission Line | p. 1405 |
Effect of Carbon Doped in BN on Electronic Structures and Mechanical Properties | p. 1410 |
Simulation and Analysis of the Wheat Stem Lodging | p. 1416 |
Study on Impedance Calculation of Viscoelastic Material in Acoustic Tube | p. 1420 |
Study on Tribological Behaviors of FeS Solid Lubrication Duplex Layer under n-Fe3O4 Additive Lubricating | p. 1427 |
Crevice Corrosion Behaviors of X52 Carbon Steel in Chloride Containing Solutions | p. 1432 |
A Research on the Stress Dispersion Property of the Warp Knitted Space Fabric | p. 1436 |
The Qualitative Analysis of Far-Infrared Fiber by Near-Infrared Spectroscopy | p. 1441 |
Determination of Boric Anhydride in Ascharite Ores by Inductively Coupled Plasma Atomic Emission Spectrometry | p. 1445 |
Surface Activity Research of Cationic Gemini Surfactants | p. 1450 |
3D Generalized Beam (GB) Lattice Model for Analysis of the Failure of Concrete | p. 1455 |
Dynamic Stress and Deformation of Non-Homogeneous Poroelastic Moderately Thick Shells of Revolution Saturated in Viscous Fluid | p. 1466 |
High-Temperature Deformation Characteristics of a SA516GR70 Vessel Steel | p. 1471 |
An Optimized Design Method for Thickness of Shells with Multi-Holes Based on Finite Element Method Theory | p. 1478 |
Numerical Analysis of a New Test Method for Evaluating the Mechanics Characteristics of Steel Deck Pavement | p. 1482 |
A New Stress Mathematical Model of Deformation Zone while Straightening Thin-Walled Tube | p. 1488 |
Segmented Optimization Design of Aluminum Alloy Goal Crossbar Based on FEM | p. 1494 |
Flexural Behavior Characteristics of UHPC According to Twisted Steel Fiber | p. 1499 |
Fatigue Life Prediction of Welded Case Shell on Aeroengine under Combined Internal Pressure and Axial Loads | p. 1505 |
Study on Bearing Behaviors of Bolted Joints in Composite Laminates | p. 1509 |
Analysis of Structural Parameters for Unbonded Flexible Pipes | p. 1514 |
Design and Cut Skills in Accordance with the Physical Properties of the Gem Stones | p. 1520 |
A New Comprehensive Utilization Method for Coal Gangue: Preparing Alite-Sulphoaluminate Cement | p. 1527 |
Catalytic Hydrolysis of CCl2F2 over Solid Base CaO/ZrO2 | p. 1533 |
Dissolution and Regeneration of Reed Leaf Fibers in Imidazole-Based Ionic Liquids | p. 1539 |
Effects of Molybdenum Doping on Optical Properties of Sm0.3Ce0.7O1.85 | p. 1543 |
Effects of Nano Particle Hydroxyapatite on Cadmium Bioaccumulation and Translocation in Pakchoi (Brassia chinensis) from Cadmium Polluted Soil | p. 1548 |
Experimental Study of Thermal Plasma Processing Waste Circuit Boards | p. 1553 |
Preparation and Characterization of Alginate/Polyvinyl Alcohol Composite Fibers Containing Copper Ions | p. 1562 |
Study of Reed Leaf Fibers' Degumming in High Temperature and Pressure | p. 1566 |
Treatment of Cationic Dye Wastewater with Hybrid Sorbent Generated by Anionic Dye Wastewater Hybridization with Calcium Fluoride | p. 1571 |
Photoelectrocatalytic Degradation of HCB by N-Doped TiO2 Nanotube Arrays | p. 1580 |
QSAR Study of the Adsorption Mechanism of Ascorbic Acid towards Iron in Alkaline Media | p. 1585 |
Study on the Performance of Orange Oil Cleanser | p. 1589 |
The Preparation and Characterization of Starch Oxidized by Nitric Acid and its Properties of Calcium Complexing Capacity | p. 1593 |
Removal Chromium and Turbidity Using Starch Derivative Flocculant CSAX | p. 1597 |
Synthesis and Paclobutrazol Visible-Light Degradation of Al/S Doped TiO2 Mesoporous Materials with Pyridine as a Template | p. 1602 |
Use of Rice Husk Ash to Treat Simulated Agricultural Cultivation Wastewater | p. 1609 |
Effects of Recycling Ladle Lining Materials on Phase Composition and Microstructure of Al2O3-SiC-C Castable for Iron Runner | p. 1614 |
Effects of Recycling Ladle Lining Materials on Sintering Performance of Al2O3-SiC-C Castable for Iron Runner | p. 1619 |
Treatment of Chlorobenzene Containing Wastewater by Titanium Oxide Photocatalyst | p. 1624 |
Evaluation of the Leaching Behavior of Hexavalent Chromium from Malaysian Electric Arc Furnace Steel Slag | p. 1628 |
Simultaneous Nitrification and Denitrification in Biofilm-Electrode Reactor | p. 1633 |
A Preliminary Investigation on the Preparation of Bagasse Fly Ash as Clarifying Aid for Clarification of Cane Juice | p. 1637 |
Assessment of Degree of Maturity of Compost Produced by Different Kitchen Waste Composting Methods | p. 1642 |
Study on Spectrophotometric Determining Trace Tetracycline by Phase-Separation Floatation | p. 1652 |
Experimental Study on Cr6+ Adsorption in Water about Corncob | p. 1656 |
Spatial Distribution in Forest Soil Nutrients and its Relationship with Ecological Factors on the up Stream of Taihu Lake Basin | p. 1660 |
Study of Thermal Degradation of Polymers | p. 1664 |
Seasonal Soil Freezing Characters in Daxinganling | p. 1668 |
Experiment and Analysis on Temperature Distribution of Straw Double-Grate Briquette Boiler Furnace-Tank | p. 1673 |
Heteropolyacid Photocatalytical Degradation of Atrazine in Aqueous Solution under UV-Irradiation | p. 1680 |
Investigation on the Electrochemical Behaviors of Phenol Oxidation on GCE (Glassy Carbon Electrode) | p. 1684 |
Study on Preparation of Iron-Based Flocculant by Hydrogen Peroxide Oxidation Process | p. 1688 |
Research on Cavitation and Impinging Stream Microelectrolysis Reactor for Treating Organic Wastewater | p. 1692 |
The Influence of Rainwater Reuse on Urban Water Circulation and Downstream Eco-Environment | p. 1696 |
The Evaluation of Photocatalytic Properties of Iron Doped Titania Photocatalyst by Degradation of Methylene Blue Using Fluorescent Light Source | p. 1700 |
Research on Characterization and Application of High-Performance Ion Exchange Material | p. 1704 |
An Evaluation Method of Water Resources Carrying Capacity Based on Projection Pursuit Model | p. 1710 |
Research of the New Composite Solid Lubricant Coating | p. 1719 |
Improving Anti-Aging Coatings by Coupling of Organic and Inorganic Ultraviolet Absorbers | p. 1723 |
Dielectric and Tunable Properties of Lead Barium Strontium Titanate Thin Films Fabricated by Radio Frequency Magnetron Sputtering Method | p. 1728 |
Study on Corrosion Wear Behavior of 70 Aluminum Alloy Anodic Oxide Coating | p. 1735 |
Effect of Hydrogen Dilution on Properties of Microcrystalline Silicon Thin Films Prepared by VHF-PECVD | p. 1739 |
Quantum Size Effects of Chemical Bath Deposited ZnSe Thin Films | p. 1743 |
W-Doped Vanadium Oxide Thin Films Prepared by Reactive Magnetron Sputtering | p. 1747 |
Effects of Cu Addition on Microstructure and Adhesion Properties of Ti-Al-N Nanocomposite Films Deposited by Magnetron Sputtering | p. 1751 |
Influence of Rare Earth on the Peeling Properties of Ultra-Thin Copper Foil with Carrier | p. 1755 |
Mechanical Instability of Wedge-Shaped Cr Films Quenched by Silicone Oil during Deposition | p. 1759 |
Solution-Based Metal Induced Crystallization of Amorphous Silicon Films | p. 1765 |
Dependence of the Coating Carbon Layer Configuration of Cordierite Monolith on Coating Reaction Conditions in Methane Decomposition | p. 1769 |
Investigation of Corrosion Resistant of Al-Zn-Si-Re-Mg Coating | p. 1775 |
Microstructure and Wear Properties of TiC/Fe-Based Composite Coating Prepared by PTA Weld-Surfacing Process | p. 1780 |
Microstructures and Wear Resistance of Si-Al-Y Co-Deposition Coatings on #947;-TiAl Alloy | p. 1787 |
Study on Surface Modification of Aluminum Alloys by Silicate-Based Hybrid Coating | p. 1792 |
The Investigation of Abrasive Jet Polishing on the Linear Micro-Channels Surface of SKD61 Mold Steel | p. 1799 |
The Property Comparison of Coating Prepared by Oxygen-Acetylene Spray Welding Technology and High-Frequency Induction Remelting Technology | p. 1805 |
Comparative Study of the Cyclic Oxidation Resistance of NiCrAlY and NiCoCrAlY Coatings | p. 1810 |
The High Temperature Oxidation Resistance and Anti-Oxidation Mechanism of Plasma-Sprayed NiCrAlY Coatings on Stainless Stell | p. 1814 |
A Porous TiO2 Coating with Vermiform Morphology Formed on Ti through Micro-Arc Oxidation | p. 1818 |
Effect of Atmosphere Composition on Lifetime and Oxidation Behavior of EB-PVD TBC with NiPtAl Bondcoats | p. 1822 |
Effect of Thermal Cycling on Lifetime and Failure Mechanism of EB-PVD TBC with NiCoCrAlYZr Bondcoats | p. 1826 |
Effects of Conductive Pigments on the Anti-Corrosion Properties of Zinc-Rich Coatings | p. 1830 |
Electrodepositing Ir Film at Constant Current in NaCl-KCl Molten Salts | p. 1834 |
Evolution of Microstructure and Properties of a Disk Cutter Ring Material during Carburization and Heat Treatment | p. 1838 |
Experimental Investigation on Anti-Fatigue Function of Gear Surface with Grid Micro-Morphology | p. 1842 |
Hydrothermal Synthesis of Lead Titanate Epitaxial Film for Non-Volatile Memory Device Application | p. 1846 |
Synthesis and Surface Properties of SiO2 Modified Fluorosilicone Acrylic Copolymer Hybrids | p. 1851 |
Interfacial Failureof SiN/GaAs Film/Substrate BilayersInduced by Nanoscratch | p. 1856 |
Ni-P-Diamond Composite Coating on Friction Shims | p. 1862 |
Microstructure Characteristic of Laser Cladding Ceramic Layer on High Cr Cast Steel Surface | p. 1866 |
Preparation of Superhydrophobic Coating from Fluorine-Containing Acrylate Polymer and Polysiloxane with Nano-SiO2 | p. 1871 |
Electrochemical Corrosion Behavior of Corrosion-Resistant Steel for Cargo Oil Tank | p. 1876 |
Effects of Friction Load and Ultrasonic Vibration on the Tribological Properties of Al2O3/Al2O3 Ceramic Friction Pairs under Liquid Paraffin Lubrication | p. 1881 |
Research on the Microstructure and Performance of Co-Based Alloy Surfacing Layer | p. 1886 |
Fabrication of YBa2Cu3O7-#948; Superconducting Film on NiW Alloy Using Electrophoretic Deposition | p. 1892 |
Effect of Laser Cladding Al3Ti-Based Coatings on the Wear and Corrosion Resistances of AA6063 Aluminum Alloy | p. 1897 |
Application of WS2 in Solid Lubricant Coating for Metal | p. 1904 |
Electroless Ni-P Plating on Mg-7Al Alloy by Chemical Conversion Pretreatment | p. 1908 |
Synthesis and Characterization of New Mesoporous Silica Film Materials for Explosive Detection | p. 1912 |
Molecular Dynamics Simulation of the Influence Factors of Particle Depositing on Surface during Cold Spray | p. 1916 |
Simulation of Microstructure Evolution on Copper, Aluminum and Alloy during ECAP | p. 1927 |
Comparative Study on Compression Deformation Behaviors of Cast and Extruded AZ31 Alloys | p. 1932 |
Dynamic Strain Aging during Tensile Deformation of Extruded AZ81 Magnesium Alloy | p. 1937 |
Die Wear Analysis of Spur-Gear Shaft Hot Extrusion Process | p. 1942 |
Forging Effect of Horizontal V - Shaped Anvil for Heavy Axial Forgings | p. 1948 |
Influence of Temperature Difference on Front End Bending in Hot Slab Rolling | p. 1952 |
Development of Cyclic Rotating Bending Process for Microstructure Control of AZ31 Magnesium Alloy Tube | p. 1956 |
FEM Analysis of Glass Lens Molding Press | p. 1961 |
Research on Finite Element Simulation and Test of Two-Pass Deep Drawing Forming for Conical Parts | p. 1966 |
A Study on Initial Blank Design to Minimize Earing in Multi-Stage Deep Drawing Process for Rectangular Cup Using High Strength Steel Material | p. 1971 |
Deformation Behavior of AZ31 Magnesium Alloy at Elevated Temperature | p. 1976 |
Development of Radial-Axial Ring Rolling Experimental Equipment and Calculation of Ring Rolling Forces | p. 1980 |
Extrusion of Powder/Solid Clad Rods for a Desirable Hole Ratio in Powder Region | p. 1984 |
Heat Spinning Deformation Technology of 7A04 Loading-Wheel | p. 1988 |
Statistical Study on Correlation between Design Variables and Shape Errors in Flexible Stretch Forming Process | p. 1994 |
Study on the Slab Design of Medium Plate Hot Rolling | p. 2002 |
Surface Roughness Analysis of Metal Spun Parts | p. 2006 |
The Design and Simulation of Circuit for Electromagnetic Force Assisted Line Heating Device | p. 2010 |
Numerical Simulation of Large-Sized Pure Aluminum Rod under Multi-Pass ECAP | p. 2019 |
Impact Analysis of Microstructure Evolution in Hot Rolling of H-Beams | p. 2024 |
Optimization of Pre-Forging of the Aircraft Wheel Hub by FEM | p. 2029 |
Analysis of Linear Defects of Cold-Rolled Galvanized Sheet | p. 2034 |
Study on Developing Q345XJ by UFC in the CSP | p. 2038 |
The Mathematic Model of Deformation Resistance of S50C Medium Carbon Steel in Hot Rolling Process | p. 2043 |
Simulation of Die Gap Variation in Temperature Field Distribution of High Strength Steel Hot Stamping Process | p. 2048 |
Simulation and Optimization of Die Forging Process for High Pressure Valve Bonnet | p. 2053 |
Work Roll Temperature Prediction Model in Hot Strip Mill Based on Two Dimensional Alternating Difference Method | p. 2057 |
Analysis of Effect of Process Parameters on Warpage of a Automobile Bumper Injection Molded Parts | p. 2062 |
The Numerical Model of Axial Force for 4-High Mill | p. 2067 |
Research on Deformation of TC4 with Complex Profile in Hot Rolling | p. 2073 |
A Novel Three-Dimensional Direct Controlled Cell Assembling System | p. 2079 |
The Hot Pressing Process Optimization of Ti(C, N) Matrix Nano-Composite Ceramic Die Materials with the Back Propagation Neural Network and Immune Genetic Algorithm | p. 2086 |
A New Method for Quantitatively Evaluating Defects of the Green Body in Injection Moulding Based on X-Ray Digital Radiography | p. 2093 |
Modeling Powder Extrusion Pastes for Forming 410L Stainless Metallic Honeycombs | p. 2099 |
Research on the Cutting Characteristics of Coated Tools on End Milling Nickel-Based Superalloy Mar-M247 | p. 2105 |
The Identified Principle of Machining Conditions and its Application in NC Machining | p. 2109 |
The Theoretical Analysis and Application of the Ultra-Precision Machining the End Surface of Stop Valve's Valve Flap with the Diamond Facing Tool | p. 2113 |
A Dynamic Observation Concept to Keep Water-Soluble Coolant in Normal Condition for Long Time | p. 2119 |
A Visualization Study of Abrasive Flow Variation in Abrasive Air Jets | p. 2123 |
Dry Machining of T6061 Aluminium Alloy Using Titanium Carbonitride (TiCN) Coated Tools | p. 2129 |
Effects of Mixing Chamber Shape on Cutting Performance in Abrasive Water Jet | p. 2134 |
Evaluation Influences of Residual Stress on Machining Aluminum Part of Cooling Plates | p. 2140 |
Experiment Studies of Nd:YAG Laser Assisted Dressing Technique for Metal-Bonded CBN Grinding Wheel by Crankshaft Grinding | p. 2147 |
Influence of Tooth Errors and Truing Principles of Grinding Wheel Abrasion for Machining Arc Enveloping Worm | p. 2153 |
Micro-Channel Fabrication on Quartz Crystals by a Micro Abrasive Air Jet | p. 2159 |
Microgrooving Using an Ultrafine Wire Tool | p. 2164 |
Study of the Wear of Drills in Dry Drilling of NM360 Steels | p. 2169 |
Analysis of Plunge Milling Force and Tool Deformation on Cr12 | p. 2173 |
Determination of the Cutting Area Considering the Tool Slenderness Ratio for the Development of a 5-Axis Impeller Machining Automation CAM Module | p. 2178 |
Experimental Research the Cutting Force of the 40Cr Circular Cone Turning | p. 2183 |
Influence of Dielectric Jet Flushing during Electro Discharge Diamond Surface Grinding Process | p. 2187 |
Modeling and Experimental Study on Cutting Force of Diamond Circular Saw in Cutting Granite Using Response Surface Methodology | p. 2191 |
Study on Arithmetic of Surface Damage Ratio in High Speed Machining of Graphite Based on Matlab Image Processing | p. 2196 |
Wear Mechanism of PVD TiAlN Coated Cemented Carbide Tool in Dry Turning Titanium Alloy TC4 | p. 2200 |
Research on Grinding Temperature of a New Diamond Grinding Wheel | p. 2205 |
Study on Micro-Topography Characteristics of EDM Surface | p. 2209 |
A Kind of Optimization Model on Turning Process Based on Productivity and Cost | p. 2214 |
Recent Development of Parameter Optimization for Metal Cutting and Grinding Processes | p. 2218 |
Research on Tool Wear Rate of Powder Mixed near Dry Electrical Discharge Machining | p. 2222 |
The Study of Silica Sol with Great Particle Size for the SiO2 Dielectric CMP | p. 2228 |
Analysis of the Vibration Mechanism in the Turn-Milling Machining of Micro-Miniature Shafts | p. 2232 |
Atmospheric TIG Arc Diagnostics with a Low Disturbance Electrostatic Probe | p. 2239 |
Corrosion Resistance Prediction of Laser Tailor-Welded Blank Based on Partial Least Square | p. 2244 |
Distribution of Magnetic Flux Density and Magnetic Force in EMR | p. 2248 |
FEA Simulation of Clinching Process Based on GTN Damage Model | p. 2254 |
Influence of 0 Degree to the Shoulder of the Friction Stir Welding on AA 6063 and AA 7075 | p. 2261 |
Measurement of the Surface Tension of Liquid Metal-Droplet in Arc Welding | p. 2265 |
Prediction and Control of Weld Width of Deep Drawing Steel Laser Tailored Blanks | p. 2270 |
Research on Repair Welding Processes of a Bainite Steel Frog | p. 2274 |
Research on the Usability of the Defective Grid Structure | p. 2279 |
Effect of Current Waveform on Droplet Oscillation in GMAW | p. 2285 |
Effect of the Wire Temperature on the Weld Formation in GMAW | p. 2289 |
Effect of TiH2 Composition on Porous Stainless Steel and Titanium Hydride Composite Synthesized by Spark Plasma Sintering | p. 2293 |
Prediction Model of Droplet Size in Low-Current GMAW | p. 2299 |
Prediction of Welding Deformations of CRH380 Aluminum Alloy Side-Wall with Equivalent Thermal Load Method Based on Inherent Strain | p. 2303 |
The Compulsively Short Circuiting Transfer Phenomenon Study in Rotational Arc MAG Welding | p. 2311 |
A Study of Material Flow Behavior in Thickness Direction in Friction Stir Welding of 7075 Alloy Plate | p. 2315 |
Dissimilar Friction Stir Spot Welding without Key Hole between AZ31B Magnesium Alloy and 5052 Aluminum Alloy | p. 2320 |
Optimization of Parameters and Research on Joint Microstructure of Resistance Spot Welding for 316 Stainless Steel | p. 2326 |
Characteristics Evaluation of Weld Metal Zone Welded with Various Repair Welding Filler Metals | p. 2330 |
Evaluation of Effect of Welding Methods to Corrosion and Hardness Characteristics of Welded Zone | p. 2335 |
Research on Three Microcosmic Interface Defects of Titanium/Steel Laminates Manufactured by Explosive Welding | p. 2339 |
Simulation Research on Relieving Welding Residual Stress by Vibratory Stress Relief Technology | p. 2343 |
Effect of Welding Parameters on Temperature Field during Twin-Wire Submerged Arc Welding of X80 Pipeline Steel | p. 2347 |
Prediction of Weld Parameters in Gas Metal Arc Welding Process Using Curve Arc Fitting Techniques and Graphical Methods | p. 2352 |
Experimental Investigation on Femtosecond Laser Ablation of Polycarbonate | p. 2359 |
Experimental Study of Low-Pressure Water Jet Assisted Laser Processing of Al2O3 Ceramic | p. 2363 |
The Optimization Study about Technological Parameters of YAG Laser Precision Cutting Stainless Sheet | p. 2369 |
Ultrafast Laser Machine Based on All-Fiber Femtosecond Laser System | p. 2374 |
Characterization of TC17 Titanium Alloy Treated by Square-Spot Laser Shock Peening | p. 2378 |
Laser Processing Speed vs Morphology of Glazing Ceramics | p. 2384 |
Experimental Research on Flight Trajectory of Edge Electron of the Electron-Beam in the Electron Gun of Furnace | p. 2388 |
Study of Displacement Value of the Electron-Beam in the Electron Gun in Electron-Beam Furnace | p. 2391 |
Microstructures and Properties of Twin-Roll Casting 7050 Aluminum Alloy Strip | p. 2397 |
Effect of Casting Design to Microstructure and Mechanical Properties of 2 Mm Twdi Plate | p. 2404 |
Effect of DC Casting Processes on Microstructure of AlCu4.5Mn0.8 Alloy | p. 2409 |
Grain Refinement of 6061 Alloy by Low-Voltage Pulsed Magnetic Field Treatment | p. 2413 |
Effect of Annular Electromagnetic Stirring Process on Solidification Microstructure of 7075 Aluminium Alloy | p. 2418 |
Effect of Magnetostatic Field on Microstructure of 7075 Aluminum Alloy Strip Manufactured by Twin-Roll Casting | p. 2427 |
Influence of Different Roll Casting Conditions on Casting Microstructure | p. 2432 |
Simulation of Bridgman Directional Solidification Microstructure Using Phase Field Method | p. 2437 |
Application of the Dynamic Soft-Reduction Technology on the No.4 Slab Continuous Caster of Bayi Steel | p. 2441 |
Effects of Argon Partial Pressure on Interfacial Shape of Porous Copper under Unidirectional Solidification | p. 2446 |
Numerical Simulation on Mold Electromagnetic Eccentric Stirring and Central Segregation of Round Bloom | p. 2450 |
The Study on Microstructures and Properties of the Direct Squeeze Casting Al-Zn-Mg-Cu-Zr-Sc Alloy | p. 2455 |
Die Casting Mold Design of Auto Oil Pump Bracket | p. 2460 |
Analysis of Elemental Segregation in a Microalloyed Cast Steel | p. 2465 |
Mineral Processing Experiment of Copper Mineral in Yunnan Province | p. 2471 |
Mineral Processing Experiment of Quartz from Gold Ore Tailing | p. 2475 |
Analysis of Tight Gas Reservoir Forming Condition in Gulong-Changjiaweizi Region, Northern Songliao Basin | p. 2478 |
Shale Gas Seepage Mechanism and Pressure Dynamic Characteristics Research | p. 2484 |
Geological Evaluation of Puzzle Reservoirs in Putaohua Reservoir of Weixing Oilfield | p. 2490 |
Hydrocarbon Accumulation Characteristics in Cretaceous System Hailaer Basin | p. 2496 |
The Analysis of Sedimentary Evolution Mode of Denglouku-Formation in Gulong Area of Songliao Basin | p. 2501 |
The Optimal Selecting Technique on Well Logging Items and its Application to Identify Complex Lithology Profile | p. 2508 |
Sedimentary Characteristics in Zhalainuoer Group in Cano Depression Hailaer Basin | p. 2515 |
Stratigraphic Sequence Framework of Zao IV Group in Zaobei Oilfield | p. 2520 |
Preparation of Ammonium Tungstophosphate-Calcium Alginate Composite Adsorbent and its Adsorption Properties of Rubidium | p. 2524 |
Potential Indonesia Ores as Raw Material for Producing Iron Nugget | p. 2529 |
Fractal of Grain Distribution in Sintered Ore with Variable Brazil Iron Ore | p. 2534 |
Study on the Effect on Sintering Mineralization of Iron Ore | p. 2538 |
Thermodynamic Studies on Selective Oxidation of Nb, P and C in Dephosphorization of Low Niobium Hot Metal | p. 2543 |
Experimental Study on Carbothermic Reduction of Magnesia with Different Carbon Materials | p. 2552 |
The Practice of Strengthening Pulverized Coal Injection | p. 2556 |
The Investigation between Sedimentary Facies of Middle Cambrian and the Characters of Volcanic Rock, in Wenshan, Yunnan Province | p. 2560 |
Analysis of Physical Structure and Chemical Composition of Oil-Water Transition Layer in Oil Gathering and Transportation System | p. 2566 |
Resourcing Utilization of High Alumina Fly Ash | p. 2570 |
Experimental Research of Fluorite Flotation Separation | p. 2576 |
Comparison of Thermal Decomposition Kinetics of Magnesite and Limestone | p. 2580 |
Experimental Study on the Recovery of Apatite from Ore Tailings in Hebei | p. 2584 |