Title:
Advances in functional and electronic materials : selected, peer reviewed papers from the Chinese Materials Conference 2012, July 13-18, 2012, Taiyuan, China
Conference Author:
Series:
Materials science forum ; v. 745-746
Publication Information:
Durnten-Zurich, Switzerland : Trans Tech Publications, 2013
Physical Description:
xvi, 834 pages : illustrations ; 24 cm.
ISBN:
9783037856079
Abstract:
The collection of peer reviewed papers C-MRS 2012 meeting includes 137 papers selected from Symposium G: Bio- materials, Symposium H: Functional crystal materials, Symposium J: Multiferroics materials, Symposium K: Supercomputer materials and application, Symposium M: Nano and ultra-fine materials, Symposium N: Advanced ceramic materials, and Symposium U: Amorphous alloy and high entropy materials. Review from Book News Inc.: What had been a conference since the early 1990s grew into a congress in2012, sprouting 23 symposia and four volumes of proceedings to handle 534 selected papers.
Subject Term:
Available:*
Library | Item Barcode | Call Number | Material Type | Item Category 1 | Status |
---|---|---|---|---|---|
Searching... | 30000010344865 | TA401.3 C456 2013 | Open Access Book | Proceedings, Conference, Workshop etc. | Searching... |
On Order
Summary
Summary
The collection of peer reviewed papers C-MRS 2012 meeting includes 137 papers selected from Symposium G: Bio- materials, Symposium H: Functional crystal materials, Symposium J: Multiferroics materials, Symposium K: Supercomputer materials and application, Symposium M: Nano and ultra-fine materials, Symposium N: Advanced ceramic materials, and Symposium U: Amorphous alloy and high entropy materials.
Table of Contents
Preparation of Small-Diameter Silk Fibroin Tubular Scaffolds with Electrospinning Method | p. 1 |
In Vitro Antibacterial Properties of Vancomycin-Loaded Nano-Hydroxyapatite/Collagen/Calcium Sulfate Hemihydrates (VCM/nHAC/CSH) Bone Substitute | p. 6 |
Performance of Composite Cements in the Repair of Porcine Thoracolumbar Burst Fracture In Vitro | p. 13 |
Effects of Interaction of (NaPO3)6 and NaH2PO4 on Ca/P of MAO Bio-Ceramic Coating of ZK60 Mg Alloy | p. 21 |
Effect of Hot Extrusion and Cyclic Extrusion Compression Progress on the Microstructures and Properties of Mg-Zn-Y-Nd Alloy | p. 28 |
Microstructures and Properties of Biological Mg-Zn-Y-Nd Alloy by Friction Stir Processing | p. 33 |
Adsorption for Au3+ by Persimmon Tannins Immobilized on Collagen Fiber | p. 39 |
Improvement of the Hydrophilicity of Cu/LDPE Composite and its Influence on the Release of Cupric Ions | p. 46 |
Preparation of Poly (MMA-S-DVB) Microspheres by Suspension Polymerization Method | p. 53 |
Study on the Preparation of Silver Nanoparticles Coated with Diamond-Like Carbon Film and their Properties | p. 60 |
Orthogonal Preparation and Microscopic Analysis of Porous Ceramic Foamed by Aerogen | p. 66 |
Synthesis of Silver Particles by Replacement Reaction | p. 72 |
The Effect of High Gravity Field on the Hydrothermal Preparation of the Nanostructured Materials | p. 78 |
Fabrication of Platinum Nanoparticles through Ionic Liquid Method and its Catalytic Properties in Hydrogenation Reaction | p. 84 |
Fabrication of VO2 Film in the Spin-Coating Way | p. 90 |
Effects of Ho-Doping on Crystal Structure and Microstructure of La0.7Sr0.3MnO3 Ceramics | p. 96 |
Preparation and Magnetic Properties of BiFeO3 and NiCuZn Ferrite Multiferroic Composites | p. 102 |
Synthesis, Microstructure, and Dielectric Properties of Mn-Doped 0.33BaTiO3-0.67BiFeO3 Multiferroic Solid Solutions | p. 107 |
BiFeO3 Nanoparticles Prepared by NaNO3-Assisted Low-Heating Temperature Solid State Reaction Method | p. 113 |
Study on the Rolling Process of 1J22 Soft Magnetic Alloy | p. 119 |
Sintering Time Influences on Microstructure and Electrical Properties of Scandium Doped Zinc Oxide Varistor Ceramics | p. 126 |
The Influence of Bi Content on the Properties of Bismuth Ferrite Thin Films Fabricated by Magnetron Sputtering | p. 131 |
Structure Characterisation and Optical Properties of Eu3+-Doped LaAlO3 | p. 136 |
Ferroelectric and Magnetic Properties of Co Doping Bi6Fe2Ti3O18 Ceramics | p. 142 |
Micro-Displacement Positioning of Giant Magnetostrictive Actuator | p. 146 |
A Device for Measuring High-TC Superconductor Transition Temperature with Electric Transport and AC Susceptibility Methods Based on Small Cryocooler Cooling | p. 152 |
Progress on Internal-Tin Route Nb3Sn Superconducting Strand for ITER in China | p. 158 |
Annealing Effects on the Microstructure and Mechanical Properties of Cu-Nb Microcomposites | p. 163 |
Preparation of Multi-Core Bi-2212/Ag Wires | p. 168 |
Mechanical and Superconducting Properties of NbTi Reinforced MgB2 Wires | p. 173 |
A Hybrid High-Tc Superconducting Magnetic Levitation Sculpture Model | p. 179 |
Magnetization Method Design of Bulk Multi-Seeded High Temperature Superconductors | p. 185 |
AC Losses of YBCO Coated Conductor with Ferromagnetic Substrate in DC Field | p. 191 |
Analysis of the Permanent Magnet Guideway of High Temperature Superconducting Maglev | p. 197 |
High Quality MgB2/Nb Deposited by HPCVD Method | p. 203 |
Degradation of Porosity and Enhanced Critical Current Density in MgB2 with a Toluene-Treatment Boron Powder | p. 208 |
Effect of Various C Sources Co-Doping on Transport Critical Current Density and Grains-Connectivity of MgB2/Fe Tapes | p. 214 |
Influence of Repeated Tensile Stress on Determining the Critical Tensile Stress/Strain of Copper Reinforced Bi-2223/Ag Tapes | p. 219 |
A Review of the Ion Beam Assisted Deposition Researches towards Industrialization for the Second Generation High Temperature Superconducting Wire Fabrication | p. 225 |
Numerical Analysis of Levitation Forces Dynamic Behavior in the HTS-Magnet Levitation System | p. 233 |
Effect of Sintering Conditions on the Phase Formation and Microstructure of Bi-2223/Ag/Ni Composite-Sheathed Tapes | p. 239 |
Effect of Firing Temperature on Microstructure and Superconductivity of YBCO Films Derived from Low-Fluorine Solution | p. 243 |
Preparing Ultrathin MgB2 Thin Film by Ex Situ Annealing of Mg-B Precursor Film | p. 249 |
Influence of Electron-Beam Annealing Duration on MgB2 Film Superconductivity | p. 255 |
Preparation of EuBCO Epitaxial and Textured Films by F-Free Polymer-Assisted Chemical Solution Deposition Method | p. 261 |
MOD-Derived YBa2Cu3O7-#948; Thin Films using a Fast Pyrolysis Process | p. 267 |
Template-Directed Electrodeposition of SnO2 Nanotubes and 1D Zn/SnO2 Core-Shell Nanostructures | p. 275 |
The Influence of High-Energy Ball Milling and Sintering Process on the Microstructure and Mechanical Properties of Al-Ni-Y-Co-La Alloy | p. 281 |
Microstructure and Mechanical Properties of a Multi-Modal Al Alloy with High Strength | p. 286 |
Preparation and Characterization of HGM-Ni0.5Co0.5Fe2O4 Core-Shell Particles by Homogeneous Coprecipitation | p. 293 |
Effect of Severe Plastic Deformation at Ambient Temperature on Microstructures and Mechanical Properties of Aluminum Alloy 2519 | p. 298 |
Microstructural Characterization of an Al-Mg-Si Aluminum Alloy Processed by Equal Channel Angular Pressing | p. 303 |
Hydrothermal Synthesis and Morphology Evolution of Perovskite PbTiO3 Crystals with Different Lead Sources | p. 309 |
Atomistic Simulation Study on the Tensile Deformation Behaviour of Nanocrystalline Ni | p. 315 |
A Strengthening Model of Cu-Cr In Situ Fibrous Composites Produced by Equal Channel Angular Pressing | p. 321 |
Synthesis of Nano-WC by High-Energy Ball Milling | p. 327 |
Microstructural Evolution of Fe-Based Metallic Glass/2024-Al Powder during High Energy Ball Milling Process | p. 335 |
Study on the Preparation and Properties of Epoxy/PEI/Nano-Attapulgite Nanocomposites | p. 341 |
Indentation Stress Relaxation Behavior in As-Deposited and Rolling Nanocrystalline NiFe | p. 352 |
Influence of Annealing on Magnetic Performance for 1K107 Amorphous-Nanocrystalline Soft Magnetic Alloy | p. 357 |
Effect of Annealing on Mechanical Properties of Copper Alloys Deformed at Cryogenic Temperature | p. 363 |
Synthesis of Carbon Nanospheres with Small Diameterby Microwave Pyrolysis of Methane Directly | p. 371 |
Interfacial Assembly of Two Gemini-Type Schiff Base Amphiphiles with Aromatic Spacers in Organized Molecular Films | p. 376 |
Hydrothermal Synthesis and Photoluminescence of Pre-Perovskite Lead Titanate Nanofibers | p. 382 |
High-Cycle Fatigue Behavior of Pure Iron with Gradient Structures Layer | p. 387 |
Effect of Poly Sodium-p-Styrenesulfonate on the Phase Formation and Morphology of the Hydrothermally Synthesized Bismuth Ferrite Powders | p. 393 |
Formation of Nanocale Oxide Particles and Evaluation of Threshold Stress of Fe-9Cr-0.2Ti-0.3Y2O3 Nanostructured Ferritic Alloy | p. 398 |
Effect of Different Factors on Falling Process of Melt Electrospinning Jet | p. 407 |
Microstructural Characterizations of Maraging Steel Processed by Equal-Channel Angular Pressing | p. 412 |
Instability and Pattern Formation of Thin Liquid Films Sandwiched between Soft Elastomer Layers | p. 417 |
Design of Quasi-Planar Ridge SOI Waveguide Resonator for Integrated Optical Gyro | p. 424 |
Advances in Numerical and Experimental Study of Dielectrophoretic Assembly of Carbon Nanotubes | p. 430 |
Mechanical Properties of Poly(3-hydrobutyrate-co-hydroxyvalerate)/ Biodegradable Hyperbranched Poly(ester amide) Blends | p. 436 |
Synthesis and Characteristics of Dental Composites with Novel Bis-GMA Derivate as a Resin Base | p. 442 |
Recent Progress on Research of Contact Resistance of Carbon Nanotubes | p. 447 |
Surfactant-Induced Nanofibrous Architecture of Silk Fibroin Hydrogels | p. 453 |
Hierarchical Porous TiO2 Fibre Synthesized by Cotton Template and its Photocatalytic Performance | p. 459 |
Effect of Filler Ratio on Properties of Nanohydroxyapatite/SiO2 Based Bioactive Dental Resin Composites | p. 466 |
Effects of Annealing on the Crystallization and Morphology of Electrospun Poly(L-lactic acid) Fibers | p. 473 |
Fabrication and Characterization of CuInS2 Sensitized TiO2 Electrodes Based on Improved SILAR Process | p. 478 |
Preparation and Application of Nano Ce-Zr Mixed Oxides Supported H3PW12O40 in Nitrogen Oxide Capture and Decomposition | p. 485 |
Biotemplate Synthesis of Porous Ceria Fiber and Study on its Catalytic Performance | p. 491 |
Preparation and Properties of Nanocomposite Hydrogel by Photoinitiated Polymerization | p. 499 |
Influence of Titanium Sol on the Sintering Behaviour, Microstructure and Properties of Al2O3-SiO2 Ceramic Cores | p. 507 |
Study on the Sintering Mechanism of Tin Oxide Ceramics Doping with Pr2O3 | p. 512 |
Properties of h-Bn/Si3N4 Composite Ceramics Fabricated by Gel-Casting | p. 517 |
Effects of SiO2 and ZrO2 Additives on Microstructure and Properties of Al2O3 Ceramic | p. 523 |
The Process Condition Research of SrAl2O4:Eu2+,Dy3+ Luminous Powder by Microwave Method | p. 528 |
Preparation of Graphene Nanosheet/Alumina Composites | p. 534 |
Preparation of Stable Pt Nanoparticles Supported by Mesoporous Silica SBA-15 | p. 539 |
Preparation of ZrSiO4/C Inclusion Pigments by Nonhydrolytic Sol-Gel Methed Combined with the Process of Carbon Black Modification | p. 545 |
Preparation of TiB2/TiN Nanocomposites by SP | p. 551 |
Influences of Excess PbO on Optical Properties and Microstructures of La Modified 0.75Pb (Mg1/3Nb2/3)O3-0.25PbTiO3 Electro-Optic Transparent Ceramics | p. 555 |
Mechanical Properties of NanoSiC Reinforced ZrB2-Based Ceramic Composite | p. 560 |
Mechanical Evaluation of the Porous Ceramics Prepared by Filtration with a Framework Structure of the Polycrystalline Fibers | p. 565 |
Tensile Strength and Bonding Mechanism of the Mullite Eramic/Ceramic Sample Joined by Phosphate Adhesive | p. 571 |
Study on the SiC-Al Co-Continuous Phase Composites | p. 577 |
Study on the In Situ Growth of Carbon Nanotubes for the Reinforcement of Cf/SiC Composite Fabricated by CVI+PIP Process | p. 582 |
Mechanism of Self-Propagating High-Temperature Synthesis of MoSi2 | p. 587 |
Application of Alumina-Magnesia Precast Blocks for LF Refining Ladle | p. 594 |
Preparation and Electrical Properties of Mn-Co-Ni-O Thin-Film for NTC Thermistors Application | p. 599 |
Sintering Performance of MgAl2O4 Spinel with Various Al2O3 Content | p. 605 |
Effects of Al2O3 Species and Particle Sizes on Properties of Al2O3-Cr2O3 Refractories | p. 610 |
Comparison of the Luminescence Properties of PbS Quantum Dots Prepared by Different Methods | p. 616 |
Joining of High Strength Graphite with Silicon Resin and SiO2 Addition | p. 621 |
Enhanced Humidity Stability of (Li,K,Na)NbO3-Based Lead-Free Piezoelectric Ceramics by Adding B2O3 | p. 626 |
Influence of Spinel on the Fracture Energy of Refractory Castable | p. 632 |
Catalytic Properties of ZrB2-Based Ultra-High Temperature Ceramics Based on the Wall Temperature Response Method | p. 636 |
Effect of Sheet Nanocarbon on Properties of Low Carbon Al2O3-C Refractories | p. 642 |
Fabrication of Silicon Carbide Reticulated Porous Ceramics through Organic Foam Infiltration Process | p. 646 |
Mechanical Properties of AlMgB14-xTiB2 Prepared by Field Activated and Pressure Assisted Synthesis | p. 652 |
Microstructure of Short Carbon Fiber/Si3N4-Reinforced BAS Glass-Ceramic Matrix Composites | p. 657 |
In Situ Synthesis of SiC and #946;-Si3Al3O3N5 Whiskers in Alumina Carbon Based Materials | p. 663 |
Porous TiN Ceramics Fabricated by Carbothermal Reduction Method | p. 667 |
Synthesis of Aluminum Titanate Powder at Low Temperature via Nonhydrolytic Sol-Gel Method by Using Aluminum Powder | p. 673 |
Energy-Storage Study in Lead-Free Anti-Ferroelectric Bi0.5Na0.5TiO3-BaTiO3-K0.5Na0.5NbO3 Ceramics | p. 679 |
Antimony-Doped SnO2 Nanoparticles with Controlled Doping Level via Nonaqueous Sol-Gel Procedure | p. 685 |
Effect of Gelation Process on Preparation of Aluminum Titanate Ultrafine Powder by Hydrolytic Sol-Gel Method | p. 690 |
Fabrication of a SiC-Ti Functionally Graded Bonding Interlayer by Precursor Method | p. 696 |
Fabrication and Mechanical Properties of SiC/Cu Composites with Zn Addition by Hot Pressing Sintering | p. 700 |
Evolution of Microstructures and Properties of the AlxCrCuFeNi2 High-Entropy Alloys | p. 706 |
Effect of Ni on Microstructure and Mechanical Properties of Bulk Nanocrystalline Fe-Al Based Alloys Prepared by Aluminothermic Reaction | p. 715 |
Fabrication Technique of Wide Nb42Ni40Co18 Amorphous Alloy Ribbons with High Melting Temperature | p. 722 |
Microstructure and Electrochemical Performances of AlxFeCoNiCr(B) High Entropy Alloys | p. 728 |
Effect of Fe on Crystallization Process of Zr-Co-Al-(Fe) Bulk Metallic Glasses | p. 734 |
Preparation of Fe76Si9B10P5 Nanocrystalline Magnetic Cores by Direct-Nanocrystallizing Method during Spark-Plasma Sintering | p. 740 |
Fabrication of Zr55Al10Ni5Cu30 Amorphous Composite Coating on Plain Carbon Steel by Laser Cladding and Remelting | p. 746 |
Bio-Properties of Zr-Based BMGMC as Potential Hard Tissue Implants | p. 754 |
Soft Magnetic Properties of the Fe76Si9B10P5/Zn0.5Ni0.5Fe2O4/PVA Composite Film | p. 761 |
Tailoring Microstructures and Mechanical Properties of AlCoCrFeNiTi0.3 High-Entropy Alloys by Heat Treatment | p. 768 |
Microstructure and Properties of Multi-Component AlxCoCrFeNiTi0.5 High-Entropy Alloys | p. 775 |
Investigation of Viscosity Measurements of Molten Cu-Zr-Al Alloys | p. 781 |
Diffusion Bonding of Fe-Based Amorphous Ribbon to Crystalline Cu | p. 788 |
Cu-Zr-Nb Crystalline-Amorphous Composites Investigated by Thermodynamic Calculation and Ion Beam Mixing Experiments | p. 793 |
Critical Cooling Rate for the Glass Formation of Fe80-XCoxP13C7 Alloy | p. 799 |
Deformation Micromechanisms of a Ti-Based Metallic Glass Composite with Excellent Mechanical Properties | p. 809 |
Effect of Nb Addition on the Glass-Forming Ability, Soft-Magnetic Properties and Mechanical Properties of CoFeNiBSiNb Bulk Glassy Alloys | p. 815 |