Title:
Materials Structure & Micromechanics of Fracture VII : Selected, peer reviewed papers from the 7th International Conference on Materials Structure & Micromechanics of Fracture (MSMF-7), July 1-3, 2013, Brno, Czech Republic
Series:
Key Engineering Materials ; vol.592-593
Physical Description:
xviii, 826 pages : illustrations ; 24 cm
ISBN:
9783037859346
Added Author:
Available:*
Library | Item Barcode | Call Number | Material Type | Item Category 1 | Status |
|---|---|---|---|---|---|
Searching... | 30000010341460 | TA410 I585 2014 | Open Access Book | Book | Searching... |
On Order
Summary
Summary
Collection of selected, peer reviewed papers from the 7th International Conference on Materials Structure & Micromechanics of Fracture (MSMF-7), July 1-3, 2013, Brno, Czech Republic. Volume is indexed by Thomson Reuters CPCI-S (WoS).The 186 papers are grouped as follows: Chapter 1: Plenary Keynotes; Chapter 2: Atomistic Studies on Deformation and Fracture; Chapter 3: Deformation and Fracture Models Based on Crystal Defects Behaviour; Chapter 4: Mathematical Modeling Microstructure, Deformation and Fracture; Chapter 5: Multiaxial Deformation and Fracture, Experiment and Modeling; Chapter 6: Nanomaterials: Technology, Properties and Modeling; Chapter 7: Biomaterials: Deformation, Fracture, Modeling; Chapter 8: Surface and Interface Microstructure and Properties; Chapter 9: Advanced Experimental and Theoretical Methods for Microstructure Investigation; Chapter 10: Experimental Studies on the Relation between Microstructure and Mechanical Properties; Chapter 11: Micromechanisms of Fracture and Fatigue (ESIS TC2)
Table of Contents
| Microscopic Mechanism of Hydrogen Embrittlement in Fatigue and Fracture | p. 3 |
| 3D Studies of Indentation by Combined X-Ray Tomography and Digital Volume Correlation | p. 14 |
| Influence of Microstructure, Environment and Temperature on Fatigue Crack Propagation in 2XXX Aluminium Alloys | p. 22 |
| Analysis of Fatigue Damage Accumulation in TiAl Intermetallics | p. 30 |
| Atomistic Model Analysis of Local and Global Instabilities in Crystals at Finite Temperature | p. 39 |
| Stress Analysis of Highly Constrained Copper Strips with through Crack Shaped Voids Using Molecular Dynamics | p. 43 |
| Dynamic Stability of Ni FCC Crystal under Isotropic Tension | p. 47 |
| Structural Transformation in Nanowires CuAu I with Superstructure of L10 of Tetragonal Symmetry at Uni-Axial Tension Deformation | p. 51 |
| Structural Response of Metal Crystallite with BCC Lattice on Atomic Level under Nanoindentation | p. 55 |
| Comparison between Pile-Up Singularities and Stress Fields Induced by Thin Slip Bands. Application to the Prediction of Grain Boundary Microcrack Nucleation | p. 61 |
| Planar Defects and Dislocations in C40 and FCC Lattices | p. 67 |
| Thermally Activated Dislocation Motion in an AS21 Alloy and Alloy Reinforced with Short Ceramic Fibres Studied at Elevated Temperatures | p. 71 |
| Deformation and Fracture of a Magnesium Alloy at Elevated Temperatures | p. 75 |
| Thermodynamics of Dislocation Pattern Formation at the Mesoscale | p. 79 |
| Modeling and Experimental Study of Long Term Creep Damage in Austenitic Stainless Steels | p. 83 |
| 3D Discrete Dislocation Dynamics Applied to a Motion of Low-Angle Tilt Boundaries | p. 87 |
| Lattice-Spring Modeling of Graphite Accounting for Pore Size Distribution | p. 92 |
| Non-Planar Dislocations in MoSi2 | p. 96 |
| Deformation and Fracture of Hydrogenated GaSe and InSe Layered Crystals | p. 100 |
| A Contribution to the Physical Interpretation of the Morphology of Fatigue Fracture Surfaces | p. 107 |
| The Simulation of the Fatigue Fracture Process at Random Loading | p. 113 |
| Numerical Life Estimation of Structure Components Subjected to Hydrogen Embrittlement and Cycling | p. 117 |
| Mathematical Model of Fan-Head Shear Rupture Mechanism | p. 121 |
| Jet Theory in Microstructures | p. 125 |
| Thermodynamically Consistent Model of Damage in Laminated Rocks | p. 129 |
| Micromechanics of Discontinuities and High Porosity Bands Formation in the Unconsolidated Sedimentary Rocks | p. 133 |
| Micromechanical Modelling of Advanced Ceramics with Statistically Representative Synthetic Microstructures | p. 137 |
| Mass-Velocity Correlation in Impact Fragmentation | p. 141 |
| Modelling of Thermal Fracture of Functionally Graded/Homogeneous Bimaterial Structures under Thermo-Mechanical Loading | p. 145 |
| Compression of Heterogeneous Material Systems Based on Wang Tilings | p. 149 |
| Numerical Investigation on the Size Effect of a WC/Co 3D Representative Volume Element Based on the Homogenized Elasto-Plastic Response and Fracture Energy Dissipation | p. 153 |
| Identification of Structural Parameters of Metal Fibre Concrete Using Magnetic Approach | p. 157 |
| Dynamic Recrystallization of the Alloy Fe-40at.%Al-Zr-B | p. 161 |
| Inaccuracy in Residual Stress Estimation and its Influence on the Residual Lifetime of Polymer Pipes | p. 165 |
| Criterion for Crack Kinking out of the Interface of Two Orthotropic Layers Subjected to Thermal and Mechanical Loading | p. 169 |
| The Experimental Study and Numerical Estimation of Fracture Toughness of Heterogeneous Welded Joints | p. 173 |
| Critical Value for Crack Propagation from Sharp V-Notch | p. 177 |
| Strength of an Elastic Plane with a Square Lattice of Circular Holes under External Loading | p. 181 |
| Evaluation of Three-Point Bending Fracture Tests of Concrete Specimens with Polypropylene Fibres via Double-K Model | p. 185 |
| Fracture-Micromechanics Based Model of Mortars Susceptible to Shrinkage | p. 189 |
| Crack Growth Modelling in the Silicon Nitride Ceramics by Application of the Cohesive Zone Approach | p. 193 |
| Temperature Field and Solidification Structure of a Ductile-Cast-Iron Roller | p. 197 |
| The Use of Computer Simulation in the Electronic Packaging Process | p. 201 |
| Numerical Simulation of Damage to Fracture Transition in Metals Based on the Statistical Model of Mesodefect Evolution | p. 205 |
| Application of Multi-Parameter Fracture Mechanics to Study of Crack Propagation Angle in Selected Mixed-Mode Geometry | p. 209 |
| Numerical Model of Plate from Hollow Core Panels with Contact - Target Pairs | p. 213 |
| A Numerical Estimation of Fatigue Crack Tip Plastic Zone Size and Shape under Mixed-Mode Loading Condition | p. 217 |
| Interrelation between Local and Global Characteristics of Cleavage Fracture | p. 221 |
| An Experimental, Numerical and SEM Study of Fracture in a Thin Polymer Film | p. 225 |
| Stochastic Fracture Simulations of Concrete Beams with Shallow Notches | p. 229 |
| Contribution to the Life Prediction of Aluminium Alloys Parts under Isothermal Fatigue | p. 233 |
| Damage Mechanics and Critical Plane Approach to Multiaxial Fatigue | p. 239 |
| Modeling of Fatigue Crack Initiation in Wire-Bonds Using a Novel Approach of Strain Gradient Theory | p. 246 |
| Crack Growth Tendency of Surface Shear Cracks in Rolling Sliding Contact | p. 250 |
| Fatigue Crack Propagation in Steels for Railway Axles | p. 254 |
| Calibration of Selected Ductile Fracture Criteria Using Two Types of Specimens | p. 258 |
| Estimation of the Zone of Failure Extent in Quasi-Brittle Specimens with Different Crack-Tip Constraint Conditions from Stress Field | p. 262 |
| Geometry Transferability of Lemaitre's Continuum Damage Mechanics Model in the Plane Stress Specimens | p. 266 |
| Localized Plastic Flow Autowaves and the Hall-Petch Relation for Al | p. 271 |
| On the Correlation of Fracture Quantities in Small Punch Test | p. 275 |
| Influence of the Microstructure on the Fracture Behavior of Carbon Bonded Alumina | p. 279 |
| Mixed Mode Interlaminar Fracture of Carbon Nanotubes Enhanced Epoxy/Glass Fiber Composites | p. 283 |
| Features of Shock-Wave Processes and Fracture in Anisotropic Materials | p. 287 |
| Failure Mechanisms of an AISI 4135 Steel Submitted to the Disk Pressure Test under Helium and Hydrogen Gas | p. 291 |
| Measurement of Residual Stresses around the Notch of Tensile Specimens of the High-Cr Tempered Martensitic Steel F82H-Mod | p. 295 |
| Strength Hierarchy for Nano-Sized Crystals | p. 301 |
| Grain Refinement and Deformation Behaviour of Medium Carbon Steel Processed by ECAP | p. 307 |
| Deformation Mechanisms in Ultrafine-Grained Zn at Different Strain Rates and Temperatures | p. 313 |
| Interface Influence on Dispersion Dynamic of Metal Nanowires under Electric Pulse Loading | p. 317 |
| Details of the Formation of Superstructures in the Process of Ordering in Cu-Pt Alloys | p. 321 |
| Preparing of Silver Nanoparticles by Selective Dissolving of Aluminium Matrix | p. 325 |
| Glass Surface Refining by Deposition of Nano-Particles | p. 329 |
| Quantum-Mechanical Study of Single-Crystalline and Polycrystalline Elastic Properties of Mg-Substituted Calcite Crystals | p. 335 |
| Porous Magnesium for Medical Applications - Influence of Powder Size on Mechanical Properties | p. 342 |
| Fractographic Analysis of Surface and Failure Mechanisms of Nanotitanium after Laser Shock-Wave Treatment | p. 346 |
| Multiscale Heterogeneity of Bone Microporosities and Tissue Scaffolds | p. 350 |
| Analysis of Compressive Properties of Porcine Temporomandibular Joint Disc | p. 354 |
| Experimental Studies of Elastic Properties of Dental Enamel and Photopolymer Used for early Caries Treatment | p. 358 |
| Mathematical Modeling of Caries Initiation and Progression Occurring in Dental Enamel | p. 362 |
| Evaluation of Developed Texture during Cold-Rolling Deformation of Ti-Nb-Ta-Zr Biocompatible Alloy | p. 366 |
| Recrystallization Temperature Influence upon Structural Changes of 90% Cold Rolled Ti-29Nb-9Ta-10Zr Biocompatible Alloy | p. 370 |
| The Impact of Graphite Source and the Synthesis Method on the Properties of Graphene Oxide | p. 374 |
| Computational Modeling of Porous Ceramics with Bioactive Layer | p. 378 |
| Local Mechanical Properties of Various Bone Cements | p. 382 |
| Solute Interaction in Grain Boundary Segregation and Cohesion | p. 389 |
| On the Micromechanisms of Fatigue Crack Propagation in Aluminum Cast Alloys | p. 393 |
| High-Density Ceramic Materials on the Basis of Silicon Carbide | p. 397 |
| Fibre-Matrix Interface Development during High Temperature Exposition of Long Fibre Reinforced SiOC Matrix | p. 401 |
| Estimation of Apparent Fracture Toughness of Alumina Based Ceramic Laminate | p. 405 |
| Siliconizing in a Fluidized Bed Reactor | p. 409 |
| Microstructure-Based Life Prediction of Thermal Barrier Coatings | p. 413 |
| Nanoindentation of Thin Copper Coatings | p. 417 |
| Influence of Low Pressure Plasma Spraying Parameters on MCrAlY Bond Coat and its Microstructure | p. 421 |
| Fatigue Response of Hybrid Ti/APC-2 Nanocomposite Laminates with Single-Edged Cracks | p. 425 |
| Surface Relief Evolution in IN792-5A Nickel Superalloy under High Temperature Fatigue Straining with Hold Times | p. 429 |
| The Changes of Fatigue Properties in Aluminium Cast Alloy during Solution Treatment | p. 433 |
| Characteristics of Duplex Treated AISI 304 Stainless Steel | p. 437 |
| Influence of Localized Structural Defects on the PN Junction Properties | p. 441 |
| Particulate Composite Damage: Numerical Estimation of Micro-Crack Propagation Direction | p. 445 |
| Study of the Influence of Structural Defects on Properties of Silicon Solar Cells | p. 449 |
| Investigation of the Mechanical Properties of Lead-Free Solder Materials | p. 453 |
| Photo-Reflective Layer on Low Temperature Co-Fired Ceramic for Optical Applications | p. 457 |
| Degradation of TBC Coating during Low-Cycle Fatigue Tests at High Temperature | p. 461 |
| Assessment of the Unstressed Lattice Parameters for Residual Stresses Determination by Neutron Diffraction in Engineering Materials | p. 465 |
| The Influence of Long-Term Heat Treatment on Microstructure of Zr-Modified Aluminide Coating Deposited by CVD Method on MAR M200+Hf Nickel Superalloy | p. 469 |
| Thermal Analysis of Halide Activator Used in Aluminizing of TiAl Intermetallics | p. 473 |
| The Effect of Long-Term Annealing on Microstructure of Aluminide Coatings Deposited on MAR M200 Superalloy by CVD Method | p. 477 |
| Complex Metallic Alloys - Microstructure Characterization | p. 483 |
| Kinetics of Deformation Processes in a High-Alloy Cast TWIP Steel Determined by Acoustic Emission and Scanning Electron Microscopy | p. 489 |
| Microscopic Strain and Crystal Rotation Measurement within Metallurgical Grains | p. 493 |
| Advanced Microstructure Studies of an Austenitic Material Using EBSD in Elevated Temperature In Situ Tensile Testing in SEM | p. 497 |
| A Comparative Study on Infrared Thermography during Ultrasonic Fatigue Testing of Cast Steel 42CrMo4 and Cast Aluminium Alloy AlSi7Mg | p. 501 |
| Quantification of Liver Microcirculation Using X-Ray Microtomography of Vascular Corrosion Casts | p. 505 |
| Experimental Study of Defect Induced Temperature Evolution in Polycrystalline Metals | p. 509 |
| Effect of Heat Treatment on Formation of Al-Al3Ni Hypereutectic Alloys | p. 513 |
| Formation of Structurally Complex U-Phase in Al72Pd12.8Co15.2 Alloy | p. 517 |
| Using Acoustic Emission in Fracture Monitoring of Cementitious Composites | p. 521 |
| Influence of the Surface Treatment of Tubes on the Heat Transfer in Low Pressure Atmosphere | p. 525 |
| Experimental Studies of Excess Noise Sources in Concrete Based Materials as a Limiting Factor for Electromagnetic Emission Measurement | p. 529 |
| Mechanical Induced Defects and Fractures in the Silicon Solar Cell Structure | p. 533 |
| Comparing the Properties of Polypropylene Fibers Contained in Ordinary and Lightweight Concrete Using Three-Point Bending Tests with Stress Concentrator and Acoustic Emission Method | p. 537 |
| A FPGA-PC Based Acoustic Emission System with Logarithmic Preamplifier for Fracture Monitoring | p. 541 |
| Monitoring of the Damage in Stone Blocks by Means of Non-Destructive Methods | p. 545 |
| Detection of Inhomogeneities and Cracks in Composite Materials by the Method of Partial Discharges | p. 549 |
| Study of Initial Stages of Fatigue Process Using Non-Destructive Testing Methods | p. 553 |
| Microstructural Investigations of Nickel-Based Superalloys with Different Structure | p. 557 |
| Advanced 3D Packaging of Chips and Materials Integrity: Stress-Induced Effects and Mechanical Properties of New Ultra Low-k Dielectrics for On-Chip Interconnect Stacks | p. 563 |
| Fracture of Irradiated Austenitic Stainless Steel with Special Reference to Irradiation Assisted Stress Corrosion Cracking | p. 569 |
| The Effect of Radiation-Induced Structural Changes under Accelerated Irradiation on the Behavior of Water-Cooled Reactor Pressure Vessel Steels | p. 573 |
| Intergranular Embrittlement of Nuclear Reactor Pressure Vessel Steels | p. 577 |
| Influence of Morphology of Deformation Induced #945;´-Martensite on Stress-Strain Response in a Two Phase Austenitic-Martensitic-Steel | p. 582 |
| Microstructure-Related Scratch Resistance and Indentation Creep Behavior of PA6 and PA6 Nanocomposites | p. 586 |
| Damage and Fracture Behaviours in Aged Austenitic Materials during High-Temperature Slow Strain Rate Testing | p. 590 |
| Structural and Fatigue Properties of Titanium-Steel Bimetallic Composite Obtained by Explosive Welding Technology | p. 594 |
| Structural Modifications of the Aluminium Alloy in Conditions of Additional Shock Impulse Load | p. 598 |
| Influence of Cooling Rate on Final Properties of Laboratory Rolled Products | p. 602 |
| Extrapolation of Sigmoidal Creep Curve by Strain Acceleration Parameter | p. 606 |
| Determining Elastic-Plastic Properties of Al6061-T6 from Micro-Indentation Technique | p. 610 |
| Production of Al Metal Matrix Composites by the Stir-Casting Method | p. 614 |
| Elastic Properties of Porous Alumina, Zirconia and Composite Ceramics | p. 618 |
| Standing Contact Fatigue Analyse of Steels with Different Microstructures | p. 622 |
| High Temperature Fatigue Strength and Quantitative Metallography of an Eutectic Al-Si Alloy for Piston Application | p. 627 |
| Effects of Different Microstructure on Resistance of EA4T Railway Axle Steel of Equal Strength to Fatigue Crack Growth | p. 631 |
| Investigation of the Microstructure Factors Affecting the Brittle Fracture Initiation of Pre-Cracked Charpy-Type Samples of VVER-1000 RPV Steel | p. 635 |
| Microstructure and Mechanical Properties of Rapidly Solidified Al-Fe-X Alloys | p. 639 |
| Heat Treatment Effects on Static and Dynamic Mechanical Properties of Sintered SINT D30 Powder Metal | p. 643 |
| Influence of the Composition of Cement Mortars Modified by Lime or Polymers on the Mechanical Properties and Microstructure of Mortars | p. 647 |
| Influence of Fly Ash on Abrasion Resistance of Concretes with their Additions | p. 651 |
| Relation between Microstructure and Tribological Properties of High Density Polyethylene Hybrid Composites Filled with Untreated Glass Spheres, Talc and Calcium Carbonate | p. 655 |
| Influence of Heat Treatment on Crack Tip Opening Displacement and on Resistance of Crack Propagation of Alloyed Steel | p. 660 |
| Autowave Features of Plastic Deformation by Ductile Fracture | p. 664 |
| Effect of Adding Graphite Powder to a UP Polymer on Friction and Wear for Different Loads and Rubbing Speeds | p. 668 |
| Mechanical Behavior of Steel-Chips-Reinforced Concrete | p. 672 |
| Acoustic Emission from Quasi-Brittle Failure of Cementitious Composites - Experimental Measurements and Cohesive Crack Model Simulations | p. 676 |
| Influence of Heat Treatment of High-Speed Steel on its Microstructure, Hardness and Fracture Toughness | p. 680 |
| Fatigue Characteristic of Aluminium Alloy 2024 under Cyclic Bending with the Controlled Energy Parameter | p. 684 |
| Microstructure and Defects Evaluation of Varistors by Ultrasonic Waves in Low Frequency Range | p. 688 |
| Influence of the Titanium and its Alloys Microstructure on the Fatigue Crack Paths | p. 692 |
| High-Temperature Elastic Properties of Ceramics in the System MgO-Al2O3-SiO2 Measured by Impulse Excitation | p. 696 |
| Thermal Effects while Fatigue Cracking Growth under Bending | p. 700 |
| Influence of the Microstructure near the Interface on the Fatigue Life of Explosively Welded (Carbon Steel)/Zr Clads | p. 704 |
| Microstructural Aspects of Low Cycle Fatigue of Aged GX12CrMoVNbN9-1 Cast Steel | p. 708 |
| Fatigue Fracture of Turbine Blades: Case Studies | p. 712 |
| Bending Fatigue Behaviour of Diffusion and Thermal Barrier Coating Systems | p. 716 |
| Nanoindentation and Microstructural Study of Cu-Co Alloys after Severe Plastic Deformation | p. 720 |
| Mechanical Aspects of Plastic Deformation of Nickel Based Superalloy | p. 724 |
| Relations between Microstructure and Mechanical Properties in Laminated Ti-Intermetallic Composites Synthesized Using Ti and Al Foils | p. 728 |
| Fatigue Cracking and Acoustic Emission Regularities in Metals: Crack Origination and Growth | p. 735 |
| Deformation Behaviour of Asymmetrically Fatigue Cycled Metallic Materials | p. 741 |
| An Effect of the First Non-Singular Term of the Williams Asymptotic Expansion to the Stability of the Bi-Material Orthotropic Notch | p. 745 |
| Fatigue Crack Growth of Thin Wall Magnesium AZ91 Alloy Cast | p. 749 |
| Short Crack Growth Behavior in Ferrite-Bainite Dual Phase Steels | p. 753 |
| A Discrete Model for Diffusion-Induced Grain Boundary Deterioration | p. 757 |
| Role of Microstructure on Fracture Behavior of T91 Steel in Presence of Liquid Sodium | p. 761 |
| Transition from Straight to Fractal Cracks due to Projectile Penetration | p. 765 |
| The Effect of Temperature on the Course of Refractory Castables Cracking | p. 769 |
| Temporal and Spatial Evolution of Bursts in a Fiber Bundle Model of Creep Rupture | p. 773 |
| PSBs and Non-Propagation of Small Surface and Interior Cracks in Polycrystalline Copper | p. 777 |
| The True Shape of Persistent Slip Markings in Fatigued Metals | p. 781 |
| Slip Activity of Persistent Slip Bands in early Stages of Fatigue Life of Austenitic 316L Steel | p. 785 |
| Propagation of Fatigue Cracks in Notched Specimens of EN AW 7475-T761 | p. 789 |
| Trajectory and Crystallography of Crack Growth in Austenitic Steel after LCF Tests | p. 793 |
| Experimental Investigation of Modes II and III Fatigue Crack Growth in Unalloyed Titanium | p. 797 |
| Complex Evaluation of Fatigue Tests Results of Plain C30/37 and C45/55 Class Concrete Specimens | p. 801 |
| Magnesium AZ91 Alloy Cast Mechanical Properties Measured by the Miniaturized Disc-Bend Test | p. 805 |
| The Role of Second Phase Intermetallic Precipitates in Fatigue Fracture Mechanism for Aluminum Alloy AW 7075 | p. 809 |
