Title:
Physical and numerical simulation of materials processing VII : selected, peer reviewed papers from the 7th International Conference on Physical and Numerical Simulation of Materials Processing (ICPNS'13), June 16-19, 2013, Oulu, Finland
Series:
Materials science forum ; v. 762
Publication Information:
Durnten-Zurich, Switzerland ; Enfield, NH : Trans Tech Publications, c2013
Physical Description:
xvi, 801 p. : ill. ; 24 cm.
ISBN:
9783037857281
Available:*
Library | Item Barcode | Call Number | Material Type | Item Category 1 | Status |
---|---|---|---|---|---|
Searching... | 30000010335944 | TA405 P49 2013 | Open Access Book | Book | Searching... |
On Order
Summary
Summary
Volume is indexed by Thomson Reuters CPCI-S (WoS).There are continuous demands for high performance materials with enhanced properties. In the development of these materials and their processing methods, physical and numerical simulations have important roles to play. By using best current knowledge and modern facilities, these simulation techniques can enable the rapid and economic evaluation and prediction of high temperature processes and applications. The papers deal extensively with physical and numerical simulation, the modeling of processes, as well as recent advances in the processing of various materials, e.g., steels, light metals, composites, etc.
Table of Contents
Dynamic Transformation during Simulated Hot Rolling | p. 1 |
Multiple, Simultaneous, Martensitic Transformations: Implications on Transformation Texture Intensities | p. 9 |
Atomic Scale Investigation of Solutes and Precipitates in High Strength Steels | p. 14 |
Numerical Simulation of Hot Rolling | p. 22 |
Formation of an Ultrafine-Grained Austenite-Containing Microstructure from a Cold-Rolled Medium-Manganese Steel Processed Using Intercritical Annealing | p. 31 |
The Thermomechanical Controlled Processing of High-Strength Steel Plate: A New View of Toughness Based on Modern Metallography | p. 38 |
Comparison of Material Properties and Creep Behavior of 20MnCr5 and S275JR Steels | p. 47 |
Control of Microstructure by MaxStrain Device | p. 55 |
Novel Physical Simulation Technique Development for Multistage Metal Plastic Deformation Processing | p. 62 |
Physical Simulation of Hot Rolling Steel Plate and Coil Production for Pipeline Applications | p. 70 |
Physical Simulation of Thermomechanical Processing of Multiphase Mn-Al Steels with Retained Austenite | p. 76 |
Designing a Novel DQ&P Process through Physical Simulation Studies | p. 83 |
Achieving High Tensile Properties in a C-Mn-Si Structural Steel by Simulating Hot Rolling and Heat Treatment Schedules | p. 89 |
The Development of Interphase Precipitated Nanometre-Sized Carbides in the Advanced Low-Alloy Steels | p. 95 |
Effect of Heating Process on Retained Austenite of Mn-TRIP Steel | p. 104 |
Crystallographic Features of Low-Carbon Bainite Formed under Non-Isothermal Conditions | p. 110 |
Modeling of Microstructure and Mechanical Properties of Hot Rolled Steels | p. 116 |
Modelling of Strain Rate and Temperature Dependent Flow Stresses of Supercooled Austenite for AISI 4140 | p. 122 |
Recrystallization Behavior of 0.11% Ti-Added Complex Phase Steel during Hot Compression | p. 128 |
Characterization and Modeling of Softening Kinetics during Hot Deformation in Modern Steels | p. 134 |
Softening Kinetics in High Al-Nb Microalloyed Steels | p. 140 |
Study of the Effect of Thermomechanical Processing on Grain Refinement in HSLA Steels | p. 146 |
Development of Nano-Scale Precipitation Strengthened Hot-Rolled 590MPa Grade Wheel Steel | p. 152 |
Microstructure and Mechanical Properties of X80 Induction Heating Bends | p. 158 |
Effect of Reheat Conditions on Microstructure Evolution and Precipitation Behavior in High Strength Linepipe Steel | p. 165 |
Effect of Different Cooling Paths on the Microstructure and Properties of a Plain Carbon Steel | p. 171 |
Microstructural Evolution during Tempering of 16Cr-5Ni Stainless Steel: Effects on Final Mechanical Properties | p. 176 |
Young's Modulus Profile in Kolsterized AISI 316L Steel | p. 183 |
Effect of Rare Earth Addition on Dynamic Recrystallization and Precipitation Behavior of a Niobium-Containing Microalloy Steel | p. 189 |
Physical Modelling the Microstructure Formation in Advanced High-Strength Steels | p. 194 |
Mathematical Modelling of Hot Rolling: A Practical Tool to Improve Rolling Schedules and Steel Properties | p. 210 |
Numerical Simulation of Thermal Stress and Deformation in a Casting Using Finite Difference Method | p. 218 |
Numerical Simulation of Casting Thermal Stress and Deformation Based on Finite Difference Method | p. 224 |
Research and Development on CAD/CAE Integration of Casting Process System Based on IGES Neutral File | p. 230 |
Advanced Methods in Modelling of Metallurgical Unit Operations | p. 236 |
Effect of Interfacial Tension on the Emulsification of Slag - Considerations on the CFD Modelling of Dispersion | p. 242 |
Three Phase CFD-Simulation of CAS-OB Ladle | p. 248 |
Numerical Study on the Removal of Hydrogen and Nitrogen from the Melt of Medium Carbon Steel in Vacuum Tank Degasser | p. 253 |
Soft Reduction of a Cast Ingot on the Incomplete Crystallization Stage | p. 261 |
Introduction of Materials Modelling into Processing Simulation | p. 266 |
Hybrid Modeling of Flat Rolling Process during Hot Rolling | p. 277 |
Evolution of Strain in Multipass Hybrid Equal Channel Angular Pressing Using 3D Finite Element Analysis | p. 283 |
Simulation of Thermomechanical Control Processing of Steels through the Use of Experimental Planning and FEM | p. 289 |
Modelling of Grain Refinement Induced by SMAT Process, Using a Complete Numerical Chaining Methodology | p. 295 |
Steel Property and Process Models for Quality Control and Optimization | p. 301 |
A Fast Optimization Approach for Multi-Pass Wire Drawing Processes with a Penalty Fitness Function | p. 307 |
Numerical Simulation of Temperature Field during Vacuum Sublimation Purification of Metal Tm | p. 313 |
Die Stress Optimization Using Finite Element and Taguchi Method | p. 319 |
Conditions for Consistent Implementation of Flow Stress Models Incorporating Dynamic Recrystallization into Finite Element Simulation Codes | p. 325 |
Influence of Different Interpolation Techniques on the Determination of the Critical Conditions for the Onset of Dynamic Recrystallisation | p. 331 |
Machining Profiling of the Working Rolls as a Way to Control Cross-Section of the Rolled Steel | p. 337 |
Numerical Investigation on Void Nucleation around Inclusions under Combined Mechanical and Thermal Cycling Conditions | p. 343 |
Challenges in Finite Element Simulations of Chain of Manufacturing Processes | p. 349 |
Application of a Material Model to Predict Rolling Forces and Microstructure during a Hot Ring Rolling Process | p. 354 |
Optimization of Local Laser Heat Treatment Process Using a Simple FE-Model | p. 360 |
The Numerical Simulation Research of Thermal Mechanical Simulation Compression Behavior with Uneven Temperature on End | p. 368 |
Effect of Constrained Conditions on the Equivalent Strain and Microstructure of 5052 Al Alloy Deformed by Groove Pressing | p. 374 |
Hot Simulation Compression of In Situ TiBw/Ti6Al4V Composites with Novel Network Microstructure | p. 382 |
Numerical Simulation of Bubble Migration in Liquid Titanium Melts under Hypergravity Field | p. 387 |
Tensile Testing of Ti-6Al-4V Alloy Superplasticity | p. 392 |
Physical Modelling of the Interaction between Softening and Nb (C,N) Strain-Induced Precipitation in High-Mn Steels | p. 398 |
Precipitation Processes in High-Manganese Steels | p. 405 |
Study on Cyclic Strain Localization and Fatigue Fracture Mechanism in High Manganese Twinning-Induced Plasticity Steels | p. 411 |
Effects of Heat Treatment Process on Microstructure and Mechanical Properties of 31Mn2SiREB Cast Steel | p. 418 |
Studies on Martensite Transformation in a Metastable Austenitic Cr-Mn Stainless Steel | p. 424 |
Modelling Tensile Curves of AISI 316L at High Temperatures Starting from Strain Hardening Analysis | p. 431 |
The Effect of Bonding Flaws on the Splitting Process in the Smart-Cut Technology | p. 437 |
Modeling of Steels and Steel Surfaces Using Quantum Mechanical First Principles Methods | p. 445 |
Materials for Electronics by Thermal Spraying | p. 451 |
Al/Al2O3 Nanocomposite Produced by ECAP | p. 457 |
Simulation Study on the Influence of H2 on the Carbon Deposition in ICVI of Thick-Walled Perform | p. 465 |
First-Principles Study on Mn-Doped TiFeSb Half-Heusler Thermoelectric Materials | p. 471 |
Welding of Aluminum Matrix Composites | p. 476 |
Phase Transitions and Microstructural Processes in Shape Memory Alloys | p. 483 |
Semi-Massive Nanocrystallised Composites: From the Process to Mechanical and Microstructural Investigations | p. 487 |
Surface Patterning of Stainless Steel in Prevention of Fouling in Heat Transfer Equipment | p. 493 |
Tuning the Composition and Microstructure of Fe-Based Alloy Thick Coatings for Heavy Duty Applications | p. 501 |
Microstructure and Strength of Si3N4 Joints Bonded with Sialon-Oxynitride Glass | p. 510 |
The Effects of Phosphotungstic Heteropoly Acid on Degradation Behaviour of Hardened Epoxide Polymers in Near-Critical Water | p. 515 |
Simulation of the Hot Extrusion Process of Sintered WCu40 Covered with a Steel Cup | p. 520 |
Microstructure and Reaction Mechanism of Multi-Laminated Ti-(SiCp/Al) Composites Subjected to Annealing at 1300°C | p. 526 |
On the Modelling of a Pulsed TIG Weld Process in a Nickel Superalloy | p. 531 |
A Process Model for Electron Beam Welding with Variable Thickness | p. 538 |
Physical and Numerical Simulation of the Heat-Affected Zone of Multi-Pass Welds | p. 544 |
Physical Simulation of Weldability of Weldox 1300 Steel | p. 551 |
Physical Simulation on Microstructure and Properties for Weld HAZ of X100 Pipeline Steel | p. 556 |
The Effect of Stabilizers on the Grain Growth and Impact Toughness of 21%Cr Ferritic Stainless Steels High-Temperature Heat-Affected Zones | p. 562 |
Thermodynamic Modeling of a Wide Thin Steel Plate Irradiated by a Moving Gaussian Laser Beam | p. 570 |
Verification of a Thermodynamic Model of a Wide Thin Steel Plate Irradiated by a Moving Gaussian Laser Beam | p. 578 |
Numerical Simulation of SAW Heat Source in the External Longitudinal Magnetic Field in 16Mn Steel | p. 584 |
Physical and Numerical Simulations of the Microstructure Evolution in AA6082 during Friction Stir Processing by Means of Hot Torsion and FEM | p. 590 |
Development of Predicted Stress and Strain during Conventional and after Mitigation of Welded Aluminium-Manganese Alloy | p. 596 |
Effect of Sn Content on the Microstructure, Mechanical and Electrical Properties of Ti2AlC/Cu Joints Brazed with Cu-Sn-Ti Filler Alloy | p. 602 |
Characterizing the Decomposition of Ti2AlC during its Brazing with Cu by Using Ag-Cu Filler Alloy | p. 607 |
Flow Characteristics of Vacuum Assisted Resin Transfer Molding Process Depending on the Capillary Phenomenon | p. 612 |
Effect of Friction and Lubrication on Formability of AA5182 Alloy in Hydroforming of Square Cups | p. 621 |
Numerical Simulation of Multiple-Step Incremental Roll-Bending Forming of a Large Metal Sheet to U-Shape | p. 627 |
Optimization of Tilt-Casting of Aluminum Alloy Automobile Drain Pipes through Numerical Simulation | p. 633 |
The Preparation and Curing Kinetics of Epoxy/PhS(4, 4'-dihydroxydiphe-nylsulfone)/aluminum tris (tetradecylacetoacetate) Latent Resin System | p. 639 |
Scale Monitoring System Tested at Ruukki Metals Plate Mill in Raahe | p. 644 |
The Possibility to Use Optical Emission Spectrometry for Identifying the Amount of Inclusions in Steels | p. 649 |
Signal Processing Method (HT and HHT) of AE for Complex Fault Detection | p. 656 |
Vibration Analysis of Ship Propulsion Shaft with the Stern Bearing Characteristics | p. 662 |
Eigenvalue Analysis of Roots Type Vacuum Pump Using FE-Method | p. 668 |
Evaluation of the Fatigue Life in Aluminum Alloy Welded Joint by Nonlinear Ultrasonic Testing | p. 673 |
Fatigue Life Prediction of Stainless Steel Laser Lap Joints Based on Natural Frequency Changes | p. 680 |
Supersonic Lance Mass Transfer Modelling | p. 686 |
New Continuous Casting and Slab Tracking Simulators for Steel Industry | p. 691 |
Experimental Validation of the Carbon Diffusion Model for Transformation of Ferritic-Pearlitic Microstructure into Austenite during Continuous Annealing of Dual Phase Steels | p. 699 |
Effect of Hot Deformation Temperature on the Restoration Mechanisms and Texture in a High-Cr Ferritic Stainless Steel | p. 705 |
Physical Simulation for Evaluating Heat-Affected Zone Toughness of High and Ultra-High Strength Steels | p. 711 |
Simulation of Active Shielding Gas Impact on Heat Distribution in the Weld Zone | p. 717 |
Hardness Profiles of Quenched Steel Heat Affected Zones | p. 722 |
Atomistic Study of Surfaces and Interfaces of Fe-Cr and Fe-Cr-Al Alloys | p. 728 |
Corrosion Resistance of Welds in 21%Cr Ferritic Stainless Steels - Is it Comparable to Type 304L? | p. 734 |
Effect of Thermal Treatment after Hot Rolling on the Microstructure of Fe-2.4wt.%Si | p. 741 |
Effect of the Si and Al Content in Ferritic Electrical Steels on the Flow Behaviour and Dynamic Softening in Hot Rolling | p. 747 |
Modelling the Hot Deformation Stress-Strain Curve of a Ni-Based Superalloy | p. 753 |
Four Dimensional Description of the Stress-Strain Relationship of Sintered and Swaged Tungsten Powders | p. 757 |
FEM-Based Analysis of Micro-Structure Parameters for Roll Forming on Aluminum Alloy Sheet | p. 763 |
Computational and Experimental Investigation on Thermal Conductivity of Si#1057; Particle Reinforced Al-Matrix Composite Containing Pores | p. 769 |
Forecasting of Hard-Alloyed Cutting Tool Resistance Based on Thermal Diffusivity | p. 777 |
Theory of Constrained Cutting: Model of Chip Formation with a Developed Plastic-Deformation Zone | p. 782 |