Title:
Advanced materials and engineering materials IV : peer reviewed papers from the 2014 4th International Conference on Advanced Materials and Engineering Materials (4th ICAMEM 2014) : October 16-17, 2014, Ningbo, China and October 19-20, Hong Kong, China
Series:
Advanced Materials Research ; 1082
Publication Information:
Pfaffikon : Trans Tech Publications 2015
Physical Description:
xiv, 598 pages : illustrations ; 24 cm.
ISBN:
9783038353676
General Note:
Includes index
Abstract:
Collection of selected, peer reviewed papers from the 2014 4th International Conference on Advanced Materials and Engineering Materials (4th ICAMEM2014), October 16-17, 2014, Ningbo, China and October 19-20, Hong Kong, China. The 115 papers are grouped as follows: Chapter 1: Behavior and Characterization of Materials, Chapter 2: Material Processing, Chapter 3: Heat Treatment of Metals, Chapter 4: Concrete, Rock, Civil Engineering, Chapter 5: Fluid Mechanics, Heat Transfer, Chapter 6: Strength of Materials, Accidents, Corrosion, Chapter 7: Films, Surface Analysis, FPGA and ROM, Chapter 8: Machine Parts and Mechanisms of Technological Equipment, Control and Automation, Chapter 9: Sensors and Measurement.
Added Author:
Available:*
Library | Item Barcode | Call Number | Material Type | Item Category 1 | Status |
---|---|---|---|---|---|
Searching... | 30000010341478 | TA401.3 A389 2015 | Open Access Book | Book | Searching... |
On Order
Summary
Summary
Collection of selected, peer reviewed papers from the 2014 4th International Conference on Advanced Materials and Engineering Materials (4th ICAMEM2014), October 16-17, 2014, Ningbo, China and October 19-20, Hong Kong, China. The 115 papers are grouped as follows: Chapter 1: Behavior and Characterization of Materials, Chapter 2: Material Processing, Chapter 3: Heat Treatment of Metals, Chapter 4: Concrete, Rock, Civil Engineering,Chapter 5: Fluid Mechanics, Heat Transfer,Chapter 6: Strength of Materials, Accidents, Corrosion, Chapter 7: Films, Surface Analysis, FPGA and ROM, Chapter 8: Machine Parts and Mechanisms of Technological Equipment, Control and Automation, Chapter 9: Sensors and Measurement.
Table of Contents
Preparation and Structure of a Novel PS/Fe3O4 Nanochain | p. 3 |
Synthesis and Characterization of Au/Fe3O4 Nanocomposite | p. 6 |
Design of Cylindrical Metamaterial Invisible Cloak with Non-Singular Electromagnetic Tensors | p. 10 |
Morphology and Crsytallization Control of Multifunctional GdPO4:Eu Nanostructures by Hydrothermal Preparation | p. 14 |
Deflagration of Emulsion Explosive | p. 18 |
Emulsion Explosives Containing Catalytic Metal Ion | p. 22 |
Stability Test of Emulsion Matrix in the Emulsifier | p. 26 |
Enhance the Power Capability of TaN Thin Film Resistor by Improving Processes | p. 30 |
Study on Low TCR TaN Thin Film Resistors by D.C. Magnetron Sputtering | p. 34 |
Application of Dark Field Model of OM in Quantitative Detection of Strengthen Phase in Beryllium Bronze | p. 38 |
Study of UV Irradiation on Behavior of NBR Rubber from Oil Seal | p. 42 |
Unusual Properties of Anisotropic Magnetodielectric Metamaterials | p. 46 |
Application of Nanocomposite Track Membranes for Electron Microscopy Samples Preparation | p. 51 |
Magnetic Property of Ni-Doped Bi5Ti3FeO15 Multiferroic Ceramics | p. 57 |
Effect of High Pressure Treatment and Synthesis on Multiferroic Properties of 0.9BiFeO3-0.1SrTiO3 Ceramics | p. 61 |
Reinforcing Epoxy Resin with Polydopamine-Coated Al(OH)3: A Biomimetic Method to Constructing Organic-Inorganic Hybrid Materials | p. 65 |
Optimization of SDC Interlayer for YSZ-Based IT-SOFCs | p. 69 |
Ce-Ti-MoOx Prepared by Sol-Gel Method for Selective Catalytic Reduction of NO with NH3 | p. 73 |
Experimental Correlation between Metallurgical Parameters, Hardness and Drilling Force and Moment of Al-Si Alloys | p. 79 |
The Effection of Discharge Current on Hydrogen Plasma in the Cascaded Arc | p. 85 |
Graded Transitions Homogeneity for Ti-50.8%Ni Processed by ECAP | p. 90 |
Effects of Cu/Ba Ratio in Precursor on MOCVD-Deposited YBa2Cu3O7-x Films on YYC Buffered Ni-W Alloy Tape | p. 95 |
Thermal Cycling Simulation during Remelting Process of the Steel ASTM A743-CA6NM | p. 100 |
Extracted from Actinidia Arguta of Wild Fructification Polyphenols Optimization Conditions | p. 106 |
Using of the Principle of Autogenous Crushing in the Production of Caustic Magnesia | p. 112 |
A Study of Picosecond-Laser Drilling Technique in Ceramics | p. 117 |
Welding of Aluminum to DP600 Steel Plates by Refill Friction Stir Spot Welding Process (Refill FSSW): Preliminary Results | p. 123 |
The Effect of Laser Processing Area on Nested-Circle Drilling Method | p. 133 |
Application of Genetic Algorithm in Cutting Parameter Optimization | p. 138 |
A Mechanistic Model for End Milling Cutting Forces in Brittle Porous Material | p. 143 |
Evolution of Microstructure in Semi-Solid of Al-2wt%Si-0.5wt%Mg and Al-4wt%Si-05wt% Alloys during Isothermal Holding | p. 152 |
Study on the Heat Treatment Process by Using Residual Heat after Forging of Steel 40MnB | p. 169 |
Influence of Aging Treatment on Microstructure and Properties of GH2132 | p. 173 |
Controlled Cooling of Rotary Furnace Shell | p. 177 |
Analysis of the Significant Influence Factors of Spray Quenching Process | p. 182 |
Hybrid Analytical-Numerical Analysis of SAE 4150 Alloy Steel Rods Cooling | p. 187 |
The Betti Number of Prior Austenite Structure of Repeated Quenching Bearing Steels (JIS, SUJ2) | p. 191 |
Effect of Hot Work on Hardness and Impact Toughness of Heat Treated Low Alloy Steels | p. 197 |
Microstructure and Mechanical Properties of a Low-Carbon Steel Treated by One-Step Quenching and Partitioning Process | p. 202 |
Testing of Pre-Stressing Masonry Wall with Using Different Thickness of Anchor Plates | p. 211 |
Study on the Compatibility of Self-Compacting Concrete Thickener and the Cementitious Material | p. 216 |
Solving Internal Forces of Piles of Jointless Bridges under the Action of Temperature Using Ordinary Differential Systems | p. 220 |
New Knowledge in the Field of Reduction of Shear Stress in the Foundation Structures of Concrete or Masonry Structures | p. 224 |
Verification of the Feasibility and Load Carrying Capacity of Models of Bored Concrete Piles | p. 230 |
Study of the Cracking Resistance Assessment of Concrete Based on the Anti-Cracking Safety Coefficient Method | p. 236 |
Optimization Inversion of the Micro-Properties of Bonded Particle Model in PFC Based on the Asynchronous Particle Swarm Algorithm | p. 240 |
Physical Model Testing of Wind Effect on the High-Rise | p. 246 |
E#1093;#1088;#1077;rimental Study of Aerodynamic Loads on High-Rise Buildings | p. 250 |
The Research of Waterproof Used on Mudstone | p. 254 |
Realization of Optional Method of Determining the Concrete's Freeze-Thaw Resistance with Help of Dilatometer | p. 258 |
The Research on the Strength of Cement Mortar with Different Particle Size of Waste Glass Powder | p. 265 |
Comparative Analysis of Pile Joints | p. 270 |
Development and Evaluation of Nanofluid Heavy-Duty Coolant | p. 279 |
Structure Optimization of Open Turbine Type Agitator | p. 284 |
Heat Transfer Simulation of Floor Structural Layer and its Optimization of the Main Parameters | p. 288 |
Experimental Investigation on Viscosities of Cu-H2O Nanofluids | p. 293 |
Experimental Investigation on Surface Tension of Water-Based Graphene Oxide Nanofluids | p. 297 |
Steady State Thermal Behaviour of Ceramic Wick Structure for Application in Two Phase Heat Transfer Devices | p. 302 |
Metallic Mesh as Capillary Structure Applied in Heat Pipe Heat Exchanger for Heat Recovery | p. 309 |
Heat Sink Cooling Fan and Rotation Speed Effect Analysis on Heat Dissipation of High Power GaN LED Package | p. 315 |
Heat Slug Material Variation Analysis on Thermal Dissipation of High Power LED | p. 319 |
Thermal Stress Comparison on Copper and Gold Wire Bonded on Aluminium Bondpad | p. 323 |
Application of Different Conductive Substrate Materials for Heat Transfer Enhancement in Cooling of Electronic Components | p. 327 |
Thermal Simulation Analysis of High Power LED with Varied Heat Sink Fin Design | p. 332 |
Convection Condition Variation Analysis on Thermal Dissipation of High Power Single Chip LED | p. 336 |
Copper Based Heat Slug Structure Variation Analysis on Heat Dissipation of High Power LED | p. 340 |
Heat Dissipation Simulation Analysis of High Power LED via Heat Slug Geometry Variation | p. 344 |
A Simulation Strategy on the Quasi-Static Axial Crushing Process of Composite Tubes Based on LS-DYNA | p. 351 |
Reinforcement Possibilities of Round Timber Bolted Joints | p. 359 |
Experimental Research on Strengthening and Fastening for Thick-Section Aluminium Alloy Bolted Joints | p. 365 |
The Fire Taking Cotton Flame Retardant Fabric Style Test and Analysis | p. 371 |
Research on Compression Performance of Variety Cashmere Sweaters | p. 375 |
Study on Preparation and Properties of APP Filled Flame Retardant Silicone Rubber Composites | p. 379 |
Inverse Multiquadrics with Optimal Shape Parameter for Stress Analysis of Functionally Graded Plates | p. 383 |
Thermal Decomposition Conditions of Emulsion Matrix in the Emulsifier | p. 387 |
Enlightment of "May 20" Explosion Accident | p. 391 |
"321" Incident Iron Ions Characteristics and Catalytic Mechanism of Thinking | p. 395 |
Deflagration to Detonation Transition of Explosives without the Effects of Shock Waves | p. 399 |
Effect of Split-Sleeve Cold Expansion on the Fatigue Life of 7050-T7451 Aluminum Alloy | p. 403 |
An Experimental Study on Anchor Performance of Bare CFRP Tendons with Bond Type Anchor | p. 408 |
Research of Directional Stress Distribution on the Fully Plastic Bulged Pressure Hull | p. 412 |
Comparison of Bond Strength of Silicon-Silica and Silicon-Pyrex in Wafer Bonding | p. 416 |
Anodic Bonding of Silicon-Pyrex and Silicon-Soda Lime Glass at Room Temperature | p. 420 |
Study on Viscosity Evaluation of Foamed Epoxy Asphalt | p. 424 |
Vibration of Laminated Composite Plates by Generalized Multiquadrics with Optimal Shape Parameter and Exponent | p. 429 |
Shape Parameter Optimization of Inverse Multiquadrics Radial Basis Function for Vibration of Laminated Composite Plates | p. 433 |
Silicon Doped Boron and Glass Based Surface Bonding Strength Analysis via Anodic Bonding Approach | p. 437 |
Failure Analysis and Precaution of NPN Transistors G3G33A | p. 441 |
Effect of the La3+-Doping Concentration on the Properties of TiO2 Thin Films by Sol-Gel Process | p. 451 |
The Nano Tungsten Thin Film and its Contacting Property with Aluminium Electrodes | p. 455 |
Out-of-Plane Thermal Conductivity of Silicon Thin Film Doped with Germanium | p. 459 |
Superhydrophobic Polyimide via UV Photo-Oxidation and Fluoroalkyl Silanization: Changes in Surface Chemistry | p. 463 |
Ambient Temperature Based Thermal Aware Energy Efficient ROM Design on FPGA | p. 467 |
FPGA Based Low Power ROM Design Using Capacitance Scaling | p. 471 |
Theoretical Investigation of Carbon Atom Adsorption and Diffusion on the Surfaces of Cu | p. 475 |
Microstructure and Wear Resistance of Nanostructure WC Composite Coatings Prepared by Argon Arc Cladding Injection | p. 480 |
Research on Fabrication of TaN Thin Film Resistors by Using Light Field Mask Method for Microwave Circuits | p. 484 |
Recognition and Segmentation Method of Adhering Bars Based on Support Vector Machine | p. 491 |
Development of a Control System of Testing Machine for Rock Breaking Based on Single-Chip Microcomputer | p. 495 |
The Preliminary Study on Wheel-and-Rail Dynamical Model of High-Speed Train | p. 501 |
Improving Efficiency and Enhancing Productivity in Transporting Fertilizers by Using Conveyor Belt Cleaners | p. 505 |
Utilization of Waste Materials from Industrial Processes of a Brazilian Sugarcane Mill for Energy Production | p. 511 |
Active Control of Structural Sound Radiation in an Acoustic Enclosure Using Distributed Point Force Actuators | p. 517 |
Control Law and Simulation Analysis of Vertical Take-Off and Landing Stage of Tilt Rotor Aircraft | p. 521 |
Non-Linear PID Controller Parameter Optimization of Vertical Take-Off and Landing Stage for Tilt Rotor Aircraft | p. 525 |
Study on Multi-Objective Optimization of Hybrid Flow Shop Scheduling Problem | p. 529 |
Carbon Nanotubes as a Nonlinear Buckled Beam for Nanoelectromechanical Systems | p. 535 |
A Silicon Semiconductor Temperature Sensor Applied for RFID Tag | p. 541 |
Design of NFC Tag Loop Antenna Based on PCB Material | p. 547 |
Velocity Correction of Total Focusing Method and its Application to Ultrasonic Inspection of Composite Laminate | p. 551 |
A Label-Free Biosensor Based on Nanoscale Porous Silicon Thin Film for Tuberculosis Detection | p. 555 |
The Modern Current Sensors of Synthetic Magnetic Resin Part 3 - Transmission Characteristics and Design of the Sensor Amplifier | p. 562 |
STIPA Method in Public Adress Sound Systems and Voice Alarm Systems Part 1: The Theoretical Basis and the Reference Speaker | p. 570 |
STIPA Method in Public Adress Sound Systems and Voice Alarm Systems Part 2: Conversion Curves and Bandwidth Effect | p. 574 |
The Modern Current Sensors of Synthetic Magnetic Resin Part 2 - AC Current Sensor up to 2 000 amps | p. 581 |